# text: "There is not enough memory available to undo this operation."
DITL_129_ParamDef.txt
# 10 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=170 y1=158 x2=230 y2=178
# text: "Done"
# item 1: BUTTON (0x04) enabled
# bounds: x1=96 y1=158 x2=156 y2=178
# text: "Cancel"
# item 2: BUTTON (0x04) enabled
# bounds: x1=18 y1=158 x2=78 y2=178
# text: "Remove"
# item 3: EDIT_TEXT (0x90) disabled
# bounds: x1=68 y1=36 x2=230 y2=56
# text: ""
# item 4: EDIT_TEXT (0x90) disabled
# bounds: x1=68 y1=74 x2=230 y2=94
# text: ""
# item 5: CUSTOM (0x00) enabled
# bounds: x1=90 y1=111 x2=202 y2=130
# data: ""
# item 6: TEXT (0x88) disabled
# bounds: x1=9 y1=9 x2=231 y2=26
# text: "Define New ^0"
# item 7: TEXT (0x88) disabled
# bounds: x1=8 y1=36 x2=65 y2=56
# text: "Name:"
# item 8: TEXT (0x88) disabled
# bounds: x1=9 y1=74 x2=65 y2=94
# text: "Value:"
# item 9: TEXT (0x88) disabled
# bounds: x1=9 y1=112 x2=83 y2=131
# text: "Data Type:"
DITL_130_AskDeleteColumn.txt
# 4 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=162 y1=151 x2=290 y2=173
# text: "Remove Formula"
# item 1: BUTTON (0x04) enabled
# bounds: x1=37 y1=151 x2=141 y2=173
# text: "Don’t Delete"
# item 2: BUTTON (0x04) enabled
# bounds: x1=303 y1=151 x2=412 y2=173
# text: "Keep Formula"
# item 3: TEXT (0x88) disabled
# bounds: x1=80 y1=8 x2=431 y2=138
# text: "The formula for ^0 depends on ^1.\n\nDo you want to remove ^0’s formula; or keep it, but change all references to ^1 into missing?"
DITL_131_TypeCheck.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=268 y1=113 x2=328 y2=133
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=80 y1=8 x2=328 y2=96
# text: "The data type of the selected expression is ^0, but it should be ^1.\n\nPlease change it to the correct type."
DITL_132_NoCurrentSel.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=225 y1=57 x2=285 y2=77
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=80 y1=8 x2=285 y2=45
# text: "You must select a piece of the formula to manipulate first."
DITL_133_NoColumnSel.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=261 y1=57 x2=321 y2=77
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=80 y1=8 x2=321 y2=43
# text: "You must choose a column from the column list first."
DITL_134_CantInsertHere.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=242 y1=89 x2=302 y2=109
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=80 y1=8 x2=302 y2=74
# text: "To add a clause, select the clause that you want to follow and press the comma key."
DITL_135_CantTouchThis.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=264 y1=73 x2=324 y2=93
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=80 y1=8 x2=324 y2=59
# text: "There will always be at least one clause. You cannot delete it unless you delete the entire expression."
DITL_136_CantDeleteHere.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=274 y1=102 x2=334 y2=122
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=80 y1=8 x2=334 y2=88
# text: "To delete a clause, select it first. Then press the delete key."
DITL_137_BadPeel.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=268 y1=104 x2=328 y2=124
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=80 y1=8 x2=328 y2=90
# text: "You can only have one non-missing argument in the selected expression.\n\nCut or clear all of the arguments but one and try again."
DITL_138_Recursive.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=268 y1=104 x2=328 y2=124
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=80 y1=8 x2=328 y2=88
# text: "The selected column references a row that has not been evaluated yet.\n\nThe subscript must be between 1 and i-1."
DITL_139_AlreadySubscripted.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=250 y1=105 x2=310 y2=125
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=80 y1=8 x2=310 y2=90
# text: "The selected column already has a subscript.\n\nTo delete a subscript, just choose the column again."
DITL_140_FutureAlert.txt
# 3 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=184 y1=125 x2=244 y2=145
# text: "OK"
# item 1: BUTTON (0x04) enabled
# bounds: x1=266 y1=125 x2=324 y2=145
# text: "Cancel"
# item 2: TEXT (0x88) disabled
# bounds: x1=80 y1=8 x2=345 y2=112
# text: "The formula for “^0” was created with a later version of JMP and may not be fully understood.\n\nWould you like to try and use it anyway?"
DITL_141_NoSumSel.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=254 y1=55 x2=314 y2=75
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=80 y1=8 x2=314 y2=42
# text: "You can only use an index with the Sum (‚àë) or Product (‚àè) functions."
DITL_142_Revert Formula.txt
# 3 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=174 y1=55 x2=234 y2=75
# text: "Revert"
# item 1: BUTTON (0x04) enabled
# bounds: x1=255 y1=55 x2=315 y2=75
# text: "Cancel"
# item 2: TEXT (0x88) disabled
# bounds: x1=80 y1=8 x2=315 y2=41
# text: "Are you sure you want to revert to the last formula saved?"
DITL_143_Unknown Class.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=261 y1=136 x2=321 y2=156
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=80 y1=8 x2=321 y2=121
# text: "The formula for “^0” contains unrecognized expressions, probably because it was created with a later version of JMP.\n\nThese expressions will be replaced with missing boxes."
DITL_144_AddRows.txt
# 13 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=165 y1=141 x2=225 y2=163
# text: "Add"
# item 1: BUTTON (0x04) enabled
# bounds: x1=86 y1=141 x2=146 y2=163
# text: "Cancel"
# item 2: CUSTOM (0x80) disabled
# bounds: x1=165 y1=141 x2=225 y2=163
# data: ""
# item 3: BUTTON (0x04) enabled
# bounds: x1=8 y1=141 x2=68 y2=163
# text: "Help"
# item 4: EDIT_TEXT (0x10) enabled
# bounds: x1=141 y1=33 x2=231 y2=51
# text: "20"
# item 5: EDIT_TEXT (0x10) enabled
# bounds: x1=134 y1=108 x2=224 y2=126
# text: ""
# item 6: RADIO_BUTTON (0x06) enabled
# bounds: x1=24 y1=58 x2=174 y2=78
# text: "At Start"
# item 7: RADIO_BUTTON (0x06) enabled
# bounds: x1=24 y1=83 x2=174 y2=103
# text: "At End"
# item 8: RADIO_BUTTON (0x06) enabled
# bounds: x1=24 y1=108 x2=129 y2=128
# text: "After row #"
# item 9: TEXT (0x88) disabled
# bounds: x1=14 y1=33 x2=132 y2=52
# text: "# of Rows to add"
# item 10: TEXT (0x88) disabled
# bounds: x1=92 y1=7 x2=191 y2=23
# text: "^0"
# item 11: TEXT (0x88) disabled
# bounds: x1=74 y1=1 x2=89 y2=5
# text: ""
# item 12: TEXT (0x88) disabled
# bounds: x1=14 y1=7 x2=89 y2=23
# text: "Data Table:"
DITL_145_Summary.txt
# 16 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=90 y1=260 x2=160 y2=285
# text: "Done"
# item 1: BUTTON (0x04) enabled
# bounds: x1=10 y1=260 x2=80 y2=285
# text: "Cancel"
# item 2: BUTTON (0x04) enabled
# bounds: x1=30 y1=225 x2=110 y2=250
# text: "Help"
# item 3: CUSTOM (0x00) enabled
# bounds: x1=90 y1=260 x2=160 y2=285
# data: ""
# item 4: CUSTOM (0x00) enabled
# bounds: x1=10 y1=65 x2=155 y2=220
# data: ""
# item 5: CUSTOM (0x00) enabled
# bounds: x1=280 y1=65 x2=425 y2=125
# data: ""
# item 6: CUSTOM (0x00) enabled
# bounds: x1=280 y1=150 x2=425 y2=235
# data: ""
# item 7: CUSTOM (0x00) enabled
# bounds: x1=280 y1=235 x2=425 y2=300
# data: ""
# item 8: BUTTON (0x04) enabled
# bounds: x1=180 y1=135 x2=260 y2=155
# text: "Remove"
# item 9: BUTTON (0x04) enabled
# bounds: x1=180 y1=80 x2=260 y2=100
# text: "» Group »"
# item 10: CUSTOM (0x00) enabled
# bounds: x1=175 y1=170 x2=265 y2=190
# data: ""
# item 11: BUTTON (0x04) enabled
# bounds: x1=172 y1=240 x2=269 y2=260
# text: "» Subgroup »"
# item 12: BUTTON (0x04) enabled
# bounds: x1=310 y1=125 x2=390 y2=145
# text: "a…Z/ Z…a"
# item 13: TEXT (0x08) enabled
# bounds: x1=10 y1=45 x2=400 y2=65
# text: "Columns from %0"
# item 14: TEXT (0x08) enabled
# bounds: x1=10 y1=5 x2=400 y2=45
# text: "Select variables to define groups."
# item 15: TEXT (0x88) disabled
# bounds: x1=29 y1=311 x2=63 y2=332
# text: "Stat"
DITL_146_noCTB.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=255 y1=55 x2=315 y2=75
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=80 y1=8 x2=315 y2=41
# text: "Sorry, the Communications Toolbox is not available on this machine."
DITL_147_cantInitCTB.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=302 y1=114 x2=362 y2=134
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=81 y1=8 x2=362 y2=100
# text: "Sorry, there was a problem while trying to initialize the Communications Toolbox.\n\n^0"
DITL_148_noConnTools.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=255 y1=55 x2=315 y2=75
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=80 y1=8 x2=315 y2=41
# text: "Sorry, there are no Connection Tools available on this machine."
DITL_149_toolNotFound.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=255 y1=96 x2=315 y2=116
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=80 y1=8 x2=315 y2=84
# text: "The tool “^0” was not found. Please select another tool."
DITL_150_connProb.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=302 y1=114 x2=362 y2=134
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=81 y1=8 x2=362 y2=100
# text: "There is a problem with the connection.\n\n^0"
DITL_151_connOpenErr.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=302 y1=114 x2=362 y2=134
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=81 y1=8 x2=362 y2=100
# text: "The connection couldn’t be opened.\n\n^0"
DITL_152_sendErr.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=302 y1=114 x2=362 y2=134
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=81 y1=8 x2=362 y2=100
# text: "There is a problem sending the start message on the connection.\n\n^0"
DITL_153_memFull.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=255 y1=55 x2=315 y2=75
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=80 y1=8 x2=315 y2=41
# text: "There is not enough memory available to open the connection."
DITL_154_futureInst.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=268 y1=124 x2=328 y2=144
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=80 y1=8 x2=328 y2=112
# text: "This instrument was created with a later version of JMP and may not be fully understood.\n\nPlease verify the connection’s configuration options."
DITL_155_cantConfig.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=219 y1=74 x2=279 y2=94
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=80 y1=8 x2=279 y2=60
# text: "The connection could not be configured properly. Please check its configuration."
DITL_156_cantBuildFormula.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=219 y1=74 x2=279 y2=94
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=80 y1=8 x2=279 y2=60
# text: "The formula for ^0 could not be rebuilt."
DITL_157_NomAxTicks.txt
# 9 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=140 y1=125 x2=210 y2=150
# text: "Change"
# item 1: BUTTON (0x04) enabled
# bounds: x1=20 y1=125 x2=90 y2=150
# text: "Cancel"
# item 2: RADIO_BUTTON (0x06) enabled
# bounds: x1=30 y1=40 x2=150 y2=60
# text: "At every tick"
# item 3: RADIO_BUTTON (0x06) enabled
# bounds: x1=30 y1=65 x2=150 y2=85
# text: "None"
# item 4: RADIO_BUTTON (0x06) enabled
# bounds: x1=30 y1=90 x2=100 y2=110
# text: "Every"
# item 5: EDIT_TEXT (0x10) enabled
# bounds: x1=105 y1=90 x2=150 y2=110
# text: "10"
# item 6: TEXT (0x88) disabled
# bounds: x1=10 y1=10 x2=160 y2=30
# text: "Axis Ticks and Labels :"
# item 7: TEXT (0x08) enabled
# bounds: x1=155 y1=90 x2=200 y2=110
# text: "ticks"
# item 8: CUSTOM (0x80) disabled
# bounds: x1=140 y1=126 x2=210 y2=151
# data: ""
DITL_158_ShwDlog.txt
# 55 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=370 y1=275 x2=440 y2=295
# text: "Chart"
# item 1: BUTTON (0x04) enabled
# bounds: x1=280 y1=275 x2=350 y2=295
# text: "Cancel"
# item 2: BUTTON (0x04) enabled
# bounds: x1=190 y1=275 x2=260 y2=295
# text: "Help"
# item 3: CUSTOM (0x00) enabled
# bounds: x1=370 y1=275 x2=440 y2=295
# data: ""
# item 4: TEXT (0x08) enabled
# bounds: x1=10 y1=17 x2=438 y2=33
# text: "Select variables from \"%0\""
# item 5: CUSTOM (0x00) enabled
# bounds: x1=10 y1=35 x2=175 y2=125
# data: ""
# item 6: CUSTOM (0x00) enabled
# bounds: x1=292 y1=35 x2=457 y2=105
# data: ""
# item 7: CUSTOM (0x00) enabled
# bounds: x1=292 y1=105 x2=457 y2=123
# data: ""
# item 8: CUSTOM (0x00) enabled
# bounds: x1=292 y1=126 x2=457 y2=144
# data: ""
# item 9: BUTTON (0x04) enabled
# bounds: x1=180 y1=63 x2=286 y2=81
# text: "Remove"
# item 10: BUTTON (0x04) enabled
# bounds: x1=180 y1=38 x2=286 y2=56
# text: "» Process »"
# item 11: BUTTON (0x04) enabled
# bounds: x1=180 y1=109 x2=286 y2=127
# text: "» Sample ID »"
# item 12: BUTTON (0x04) enabled
# bounds: x1=180 y1=130 x2=286 y2=148
# text: "» Variable »"
# item 13: CHECKBOX (0x05) enabled
# bounds: x1=180 y1=155 x2=270 y2=173
# text: "Constant"
# item 14: RADIO_BUTTON (0x06) enabled
# bounds: x1=275 y1=184 x2=347 y2=202
# text: "K Sigma"
# item 15: RADIO_BUTTON (0x06) enabled
# bounds: x1=352 y1=184 x2=415 y2=202
# text: "Alpha"
# item 16: RADIO_BUTTON (0x06) enabled
# bounds: x1=420 y1=184 x2=450 y2=202
# text: "H"
# item 17: CHECKBOX (0x05) enabled
# bounds: x1=20 y1=204 x2=80 y2=222
# text: "Mean"
# item 18: CHECKBOX (0x05) enabled
# bounds: x1=90 y1=204 x2=120 y2=222
# text: "R"
# item 19: CHECKBOX (0x05) enabled
# bounds: x1=130 y1=204 x2=160 y2=222
# text: "S"
# item 20: CHECKBOX (0x05) enabled
# bounds: x1=20 y1=204 x2=180 y2=222
# text: "Indiv. Measurement"
# item 21: CHECKBOX (0x05) enabled
# bounds: x1=20 y1=224 x2=180 y2=242
# text: "Moving Range"
# item 22: CHECKBOX (0x05) enabled
# bounds: x1=10 y1=204 x2=100 y2=222
# text: "Two Sided"
# item 23: CHECKBOX (0x05) enabled
# bounds: x1=110 y1=204 x2=200 y2=222
# text: "Data Units"
# item 24: BUTTON (0x04) enabled
# bounds: x1=95 y1=275 x2=175 y2=295
# text: "Retrieve…"
# item 25: BUTTON (0x04) enabled
# bounds: x1=30 y1=224 x2=145 y2=244
# text: "Specify Stats…"
# item 26: BUTTON (0x04) enabled
# bounds: x1=50 y1=250 x2=90 y2=270
# text: "All"
# item 27: CHECKBOX (0x05) enabled
# bounds: x1=95 y1=250 x2=125 y2=267
# text: "1"
# item 28: CHECKBOX (0x05) enabled
# bounds: x1=128 y1=250 x2=158 y2=267
# text: "2"
# item 29: CHECKBOX (0x05) enabled
# bounds: x1=161 y1=250 x2=191 y2=267
# text: "3"
# item 30: CHECKBOX (0x05) enabled
# bounds: x1=194 y1=250 x2=224 y2=267
# text: "4"
# item 31: CHECKBOX (0x05) enabled
# bounds: x1=227 y1=250 x2=257 y2=267
# text: "5"
# item 32: CHECKBOX (0x05) enabled
# bounds: x1=260 y1=250 x2=290 y2=267
# text: "6"
# item 33: CHECKBOX (0x05) enabled
# bounds: x1=293 y1=250 x2=323 y2=267
# text: "7"
# item 34: CHECKBOX (0x05) enabled
# bounds: x1=326 y1=250 x2=356 y2=267
# text: "8"
# item 35: CHECKBOX (0x05) enabled
# bounds: x1=360 y1=250 x2=430 y2=267
# text: "Mask"
# item 36: CUSTOM (0x00) enabled
# bounds: x1=90 y1=184 x2=200 y2=202
# data: ""
# item 37: EDIT_TEXT (0x10) enabled
# bounds: x1=275 y1=155 x2=325 y2=173
# text: ""
# item 38: EDIT_TEXT (0x10) enabled
# bounds: x1=80 y1=155 x2=140 y2=173
# text: ""
# item 39: EDIT_TEXT (0x10) enabled
# bounds: x1=217 y1=186 x2=267 y2=204
# text: "3"
# item 40: EDIT_TEXT (0x10) enabled
# bounds: x1=280 y1=210 x2=350 y2=230
# text: ""
# item 41: TEXT (0x08) enabled
# bounds: x1=90 y1=130 x2=180 y2=148
# text: "Sample Size:"
# item 42: TEXT (0x08) enabled
# bounds: x1=10 y1=184 x2=90 y2=202
# text: "Chart Type:"
# item 43: TEXT (0x88) disabled
# bounds: x1=220 y1=210 x2=270 y2=230
# text: "Beta"
# item 44: TEXT (0x88) disabled
# bounds: x1=220 y1=210 x2=270 y2=230
# text: "K"
# item 45: TEXT (0x08) enabled
# bounds: x1=10 y1=250 x2=45 y2=267
# text: "Tests:"
# item 46: CUSTOM (0x00) enabled
# bounds: x1=10 y1=180 x2=456 y2=182
# data: ""
# item 47: CUSTOM (0x00) enabled
# bounds: x1=210 y1=180 x2=212 y2=245
# data: ""
# item 48: CUSTOM (0x00) enabled
# bounds: x1=10 y1=245 x2=456 y2=247
# data: ""
# item 49: TEXT (0x08) enabled
# bounds: x1=180 y1=155 x2=270 y2=173
# text: "Range Span:"
# item 50: TEXT (0x08) enabled
# bounds: x1=20 y1=130 x2=170 y2=148
# text: "# of Inspection Units:"
# item 51: TEXT (0x08) enabled
# bounds: x1=10 y1=155 x2=75 y2=173
# text: "Ave Span:"
# item 52: TEXT (0x88) disabled
# bounds: x1=10 y1=155 x2=75 y2=173
# text: "Weight:"
# item 53: BUTTON (0x04) enabled
# bounds: x1=10 y1=275 x2=80 y2=295
# text: "Save"
# item 54: TEXT (0x88) disabled
# bounds: x1=178 y1=1 x2=288 y2=17
# text: "CONTROL CHARTS:"
DITL_159_cantConvertFormula.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=268 y1=113 x2=328 y2=133
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=80 y1=8 x2=328 y2=96
# text: "The formula for ^0 contains elements not supported in older versions of JMP. These elements have been replaced with missing."
DITL_160_TypeCheck2.txt
# 3 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=268 y1=113 x2=328 y2=133
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=80 y1=8 x2=328 y2=96
# text: "The data type of the selected expression is ^0, but it should be ^1.\n\nPlease change it to the correct type."
# item 2: BUTTON (0x04) enabled
# bounds: x1=69 y1=113 x2=233 y2=133
# text: "Change Column Type"
DITL_161_OtherFontSize.txt
# 5 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=133 y1=74 x2=191 y2=94
# text: "OK"
# item 1: BUTTON (0x04) enabled
# bounds: x1=57 y1=74 x2=115 y2=94
# text: "Cancel"
# item 2: EDIT_TEXT (0x90) disabled
# bounds: x1=114 y1=22 x2=189 y2=38
# text: ""
# item 3: TEXT (0x88) disabled
# bounds: x1=28 y1=22 x2=106 y2=39
# text: "Other Size:"
# item 4: CUSTOM (0x80) disabled
# bounds: x1=133 y1=74 x2=191 y2=94
# data: ""
DITL_162_Demo.txt
# 3 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=284 y1=82 x2=356 y2=102
# text: "Buy it!"
# item 1: TEXT (0x88) disabled
# bounds: x1=110 y1=12 x2=356 y2=47
# text: "Sorry, this feature is not available in the demonstration version of JMP."
# item 2: TEXT (0x88) disabled
# bounds: x1=19 y1=66 x2=269 y2=117
# text: "To purchase the full version, just call SAS Institute Inc. at (919) 677–8000 and ask for “JMP Sales.”"
DITL_163_DemoEditLimit.txt
# 3 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=284 y1=82 x2=356 y2=102
# text: "Buy it!"
# item 1: TEXT (0x88) disabled
# bounds: x1=110 y1=12 x2=356 y2=67
# text: "Sorry, you cannot do more than 50 edits in the demonstration version of JMP."
# item 2: TEXT (0x88) disabled
# bounds: x1=19 y1=78 x2=269 y2=128
# text: "To purchase the full version, just call SAS Institute Inc. at (919) 677–8000 and ask for “JMP Sales.”"
DITL_164_JrnlTooBig.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=225 y1=76 x2=285 y2=96
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=80 y1=8 x2=285 y2=59
# text: "Sorry, this journal has become too large. Please close it and create a new one."
DITL_165_EnumTable.txt
# 6 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=170 y1=225 x2=240 y2=250
# text: "Done"
# item 1: BUTTON (0x04) enabled
# bounds: x1=40 y1=225 x2=110 y2=250
# text: "Cancel"
# item 2: CUSTOM (0x80) disabled
# bounds: x1=170 y1=225 x2=240 y2=250
# data: ""
# item 3: CUSTOM (0x00) enabled
# bounds: x1=10 y1=60 x2=270 y2=215
# data: ""
# item 4: TEXT (0x88) disabled
# bounds: x1=10 y1=10 x2=270 y2=30
# text: "^0"
# item 5: TEXT (0x88) disabled
# bounds: x1=10 y1=35 x2=270 y2=55
# text: "Table of Values for ^1"
DITL_166_ContourMod.txt
# 10 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=211 y1=125 x2=281 y2=150
# text: "Done"
# item 1: BUTTON (0x04) enabled
# bounds: x1=116 y1=125 x2=186 y2=150
# text: "Cancel"
# item 2: BUTTON (0x04) enabled
# bounds: x1=21 y1=125 x2=91 y2=150
# text: "Help"
# item 3: CUSTOM (0x00) enabled
# bounds: x1=211 y1=125 x2=281 y2=150
# data: ""
# item 4: RADIO_BUTTON (0x06) enabled
# bounds: x1=11 y1=60 x2=91 y2=80
# text: "Default"
# item 5: RADIO_BUTTON (0x06) enabled
# bounds: x1=101 y1=60 x2=191 y2=80
# text: "Specify…"
# item 6: RADIO_BUTTON (0x06) enabled
# bounds: x1=201 y1=60 x2=291 y2=80
# text: "Retrieve…"
# item 7: CHECKBOX (0x05) enabled
# bounds: x1=11 y1=85 x2=101 y2=105
# text: "Fill Areas"
# item 8: TEXT (0x88) disabled
# bounds: x1=11 y1=10 x2=291 y2=30
# text: "%1 of “%0”"
# item 9: TEXT (0x88) disabled
# bounds: x1=11 y1=35 x2=121 y2=55
# text: "Contour Values:"
DITL_167_ContIntervals.txt
# 20 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=201 y1=246 x2=271 y2=271
# text: "Done"
# item 1: BUTTON (0x04) enabled
# bounds: x1=111 y1=246 x2=181 y2=271
# text: "Cancel"
# item 2: BUTTON (0x04) enabled
# bounds: x1=21 y1=246 x2=91 y2=271
# text: "Help"
# item 3: CUSTOM (0x80) disabled
# bounds: x1=201 y1=246 x2=271 y2=271
# data: ""
# item 4: EDIT_TEXT (0x90) disabled
# bounds: x1=131 y1=51 x2=251 y2=71
# text: ""
# item 5: EDIT_TEXT (0x90) disabled
# bounds: x1=131 y1=76 x2=251 y2=96
# text: ""
# item 6: EDIT_TEXT (0x90) disabled
# bounds: x1=131 y1=101 x2=251 y2=121
# text: ""
# item 7: EDIT_TEXT (0x90) disabled
# bounds: x1=131 y1=126 x2=251 y2=146
# text: ""
# item 8: CUSTOM (0x00) enabled
# bounds: x1=66 y1=151 x2=111 y2=171
# data: ""
# item 9: CUSTOM (0x00) enabled
# bounds: x1=206 y1=151 x2=251 y2=171
# data: ""
# item 10: RADIO_BUTTON (0x06) enabled
# bounds: x1=121 y1=151 x2=196 y2=171
# text: "down to"
# item 11: RADIO_BUTTON (0x06) enabled
# bounds: x1=121 y1=171 x2=196 y2=191
# text: "up to"
# item 12: CHECKBOX (0x05) enabled
# bounds: x1=66 y1=191 x2=221 y2=211
# text: "More colors"
# item 13: CUSTOM (0x80) disabled
# bounds: x1=21 y1=216 x2=241 y2=236
# data: ""
# item 14: TEXT (0x88) disabled
# bounds: x1=11 y1=51 x2=126 y2=71
# text: "# of Contours:"
# item 15: TEXT (0x88) disabled
# bounds: x1=11 y1=76 x2=126 y2=96
# text: "Minimum:"
# item 16: TEXT (0x88) disabled
# bounds: x1=11 y1=101 x2=126 y2=121
# text: "Maximum:"
# item 17: TEXT (0x88) disabled
# bounds: x1=11 y1=126 x2=126 y2=146
# text: "Fixed Increment:"
# item 18: TEXT (0x88) disabled
# bounds: x1=10 y1=10 x2=259 y2=48
# text: "To specify contours, please give any 3 of the 4 numbers requested below."
# item 19: TEXT (0x88) disabled
# bounds: x1=11 y1=151 x2=61 y2=171
# text: "Colors:"
DITL_168_NoPrinterChosen.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=229 y1=56 x2=303 y2=76
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=80 y1=8 x2=303 y2=43
# text: "You must first select a printer with the Chooser desk accessory."
DITL_169_Plot.txt
# 22 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=285 y1=261 x2=355 y2=286
# text: "Done"
# item 1: BUTTON (0x04) enabled
# bounds: x1=175 y1=261 x2=245 y2=286
# text: "Cancel"
# item 2: BUTTON (0x04) enabled
# bounds: x1=65 y1=261 x2=135 y2=286
# text: "Help"
# item 3: CUSTOM (0x00) enabled
# bounds: x1=285 y1=261 x2=355 y2=286
# data: ""
# item 4: TEXT (0x88) disabled
# bounds: x1=154 y1=1 x2=256 y2=17
# text: "OVERLAY PLOTS:"
# item 5: TEXT (0x88) disabled
# bounds: x1=10 y1=41 x2=400 y2=61
# text: "Columns from %0"
# item 6: CUSTOM (0x00) enabled
# bounds: x1=10 y1=61 x2=165 y2=201
# data: ""
# item 7: CUSTOM (0x00) enabled
# bounds: x1=255 y1=71 x2=400 y2=91
# data: ""
# item 8: CUSTOM (0x00) enabled
# bounds: x1=255 y1=96 x2=400 y2=176
# data: ""
# item 9: CUSTOM (0x00) enabled
# bounds: x1=255 y1=176 x2=400 y2=196
# data: ""
# item 10: BUTTON (0x04) enabled
# bounds: x1=175 y1=136 x2=245 y2=156
# text: "Remove"
# item 11: BUTTON (0x04) enabled
# bounds: x1=175 y1=71 x2=245 y2=91
# text: "» X »"
# item 12: BUTTON (0x04) enabled
# bounds: x1=175 y1=106 x2=245 y2=126
# text: "» Y »"
# item 13: BUTTON (0x04) enabled
# bounds: x1=175 y1=176 x2=245 y2=196
# text: "» Lbl »"
# item 14: RADIO_BUTTON (0x06) enabled
# bounds: x1=65 y1=206 x2=130 y2=226
# text: "Linear"
# item 15: RADIO_BUTTON (0x06) enabled
# bounds: x1=130 y1=206 x2=200 y2=226
# text: "Log"
# item 16: RADIO_BUTTON (0x06) enabled
# bounds: x1=65 y1=231 x2=130 y2=251
# text: "Linear"
# item 17: RADIO_BUTTON (0x06) enabled
# bounds: x1=130 y1=231 x2=200 y2=251
# text: "Log"
# item 18: CHECKBOX (0x05) enabled
# bounds: x1=255 y1=206 x2=350 y2=226
# text: "Sort X"
# item 19: TEXT (0x88) disabled
# bounds: x1=10 y1=206 x2=65 y2=226
# text: "X Scale :"
# item 20: TEXT (0x88) disabled
# bounds: x1=10 y1=231 x2=65 y2=251
# text: "Y Scale :"
# item 21: TEXT (0x88) disabled
# bounds: x1=10 y1=17 x2=400 y2=33
# text: "Select one numeric X, one or more numeric Ys."
# text: "Attributes table of ^0 has been modified. Do you want to update ^0 using the attributes in the Attributes table ?"
DITL_176_Grids.txt
# 7 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=150 y1=85 x2=220 y2=110
# text: "OK"
# item 1: BUTTON (0x04) enabled
# bounds: x1=30 y1=85 x2=100 y2=110
# text: "Cancel"
# item 2: CUSTOM (0x80) disabled
# bounds: x1=150 y1=85 x2=220 y2=110
# data: ""
# item 3: EDIT_TEXT (0x10) enabled
# bounds: x1=165 y1=10 x2=220 y2=30
# text: "11"
# item 4: EDIT_TEXT (0x10) enabled
# bounds: x1=165 y1=40 x2=220 y2=60
# text: "11"
# item 5: TEXT (0x88) disabled
# bounds: x1=10 y1=10 x2=160 y2=30
# text: "horizontal grid size"
# item 6: TEXT (0x88) disabled
# bounds: x1=10 y1=40 x2=160 y2=60
# text: "vertical grid size"
DITL_177_InsertCols.txt
# 20 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=240 y1=232 x2=310 y2=257
# text: "Add"
# item 1: BUTTON (0x04) enabled
# bounds: x1=140 y1=232 x2=210 y2=257
# text: "Cancel"
# item 2: CUSTOM (0x80) disabled
# bounds: x1=240 y1=232 x2=310 y2=257
# data: ""
# item 3: BUTTON (0x04) enabled
# bounds: x1=40 y1=232 x2=110 y2=257
# text: "Help"
# item 4: CUSTOM (0x80) disabled
# bounds: x1=175 y1=62 x2=340 y2=182
# data: ""
# item 5: RADIO_BUTTON (0x06) enabled
# bounds: x1=25 y1=82 x2=100 y2=102
# text: "At Start"
# item 6: RADIO_BUTTON (0x06) enabled
# bounds: x1=25 y1=102 x2=100 y2=122
# text: "At End"
# item 7: RADIO_BUTTON (0x06) enabled
# bounds: x1=25 y1=122 x2=170 y2=142
# text: "After Selected Col"
# item 8: RADIO_BUTTON (0x06) enabled
# bounds: x1=25 y1=167 x2=100 y2=187
# text: "Numeric"
# item 9: RADIO_BUTTON (0x06) enabled
# bounds: x1=25 y1=187 x2=115 y2=207
# text: "Character"
# item 10: RADIO_BUTTON (0x06) enabled
# bounds: x1=25 y1=207 x2=115 y2=227
# text: "Row State"
# item 11: EDIT_TEXT (0x10) enabled
# bounds: x1=135 y1=35 x2=340 y2=55
# text: "Column "
# item 12: EDIT_TEXT (0x10) enabled
# bounds: x1=130 y1=62 x2=170 y2=82
# text: "20"
# item 13: EDIT_TEXT (0x10) enabled
# bounds: x1=225 y1=187 x2=300 y2=207
# text: ""
# item 14: TEXT (0x88) disabled
# bounds: x1=10 y1=10 x2=340 y2=30
# text: "Data Table : %0"
# item 15: TEXT (0x88) disabled
# bounds: x1=10 y1=62 x2=125 y2=82
# text: "# of Cols to add"
# item 16: TEXT (0x88) disabled
# bounds: x1=10 y1=147 x2=80 y2=167
# text: "Data Type :"
# item 17: TEXT (0x88) disabled
# bounds: x1=140 y1=187 x2=220 y2=207
# text: "Field Width:"
# item 18: TEXT (0x88) disabled
# bounds: x1=10 y1=35 x2=130 y2=55
# text: "Col Name Prefix:"
# item 19: TEXT (0x88) disabled
# bounds: x1=114 y1=0 x2=129 y2=4
# text: ""
DITL_178_MoveCols.txt
# 11 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=271 y1=164 x2=341 y2=189
# text: "Move"
# item 1: BUTTON (0x04) enabled
# bounds: x1=143 y1=164 x2=213 y2=189
# text: "Cancel"
# item 2: CUSTOM (0x80) disabled
# bounds: x1=271 y1=164 x2=341 y2=189
# data: ""
# item 3: BUTTON (0x04) enabled
# bounds: x1=14 y1=164 x2=84 y2=189
# text: "Help"
# item 4: CUSTOM (0x80) disabled
# bounds: x1=115 y1=29 x2=280 y2=154
# data: ""
# item 5: RADIO_BUTTON (0x06) enabled
# bounds: x1=25 y1=34 x2=110 y2=54
# text: "To Start"
# item 6: RADIO_BUTTON (0x06) enabled
# bounds: x1=25 y1=59 x2=110 y2=79
# text: "To End"
# item 7: RADIO_BUTTON (0x06) enabled
# bounds: x1=25 y1=84 x2=110 y2=104
# text: "After =»"
# item 8: TEXT (0x88) disabled
# bounds: x1=158 y1=9 x2=363 y2=29
# text: "%0"
# item 9: TEXT (0x88) disabled
# bounds: x1=10 y1=9 x2=155 y2=29
# text: "Move Selected Cols in"
# item 10: TEXT (0x88) disabled
# bounds: x1=96 y1=1 x2=111 y2=5
# text: ""
DITL_179_Split.txt
# 23 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=270 y1=240 x2=340 y2=265
# text: "Done"
# item 1: BUTTON (0x04) enabled
# bounds: x1=160 y1=240 x2=230 y2=265
# text: "Cancel"
# item 2: BUTTON (0x04) enabled
# bounds: x1=40 y1=240 x2=110 y2=265
# text: "Help"
# item 3: CUSTOM (0x80) disabled
# bounds: x1=270 y1=240 x2=340 y2=265
# data: ""
# item 4: CUSTOM (0x00) enabled
# bounds: x1=10 y1=50 x2=160 y2=155
# data: ""
# item 5: CUSTOM (0x00) enabled
# bounds: x1=267 y1=30 x2=417 y2=105
# data: ""
# item 6: CUSTOM (0x00) enabled
# bounds: x1=267 y1=107 x2=417 y2=132
# data: ""
# item 7: CUSTOM (0x00) enabled
# bounds: x1=267 y1=135 x2=417 y2=210
# data: ""
# item 8: BUTTON (0x84) disabled
# bounds: x1=179 y1=80 x2=249 y2=100
# text: "Remove"
# item 9: BUTTON (0x04) enabled
# bounds: x1=179 y1=50 x2=249 y2=70
# text: "» Split »"
# item 10: BUTTON (0x84) disabled
# bounds: x1=179 y1=107 x2=249 y2=127
# text: "» Col ID »"
# item 11: BUTTON (0x84) disabled
# bounds: x1=179 y1=140 x2=249 y2=160
# text: "» Group »"
# item 12: RADIO_BUTTON (0x06) enabled
# bounds: x1=130 y1=210 x2=210 y2=230
# text: "Keep All"
# item 13: RADIO_BUTTON (0x06) enabled
# bounds: x1=220 y1=210 x2=300 y2=230
# text: "Drop All"
# item 14: RADIO_BUTTON (0x06) enabled
# bounds: x1=310 y1=210 x2=390 y2=230
# text: "Select…"
# item 15: EDIT_TEXT (0x10) enabled
# bounds: x1=10 y1=185 x2=220 y2=205
# text: "Untitled"
# item 16: TEXT (0x08) enabled
# bounds: x1=10 y1=10 x2=220 y2=50
# text: "Columns from %0"
# item 17: TEXT (0x88) disabled
# bounds: x1=10 y1=160 x2=120 y2=180
# text: "Output table:"
# item 18: TEXT (0x88) disabled
# bounds: x1=10 y1=212 x2=120 y2=230
# text: "Remaining Cols:"
# item 19: TEXT (0x88) disabled
# bounds: x1=267 y1=10 x2=417 y2=30
# text: "Columns to Split"
# item 20: TEXT (0x88) disabled
# bounds: x1=229 y1=0 x2=244 y2=3
# text: ""
# item 21: UNKNOWN (0x01) enabled
# bounds: x1=0 y1=0 x2=0 y2=0
# data: 00010BB9
# item 22: UNKNOWN (0x01) enabled
# bounds: x1=0 y1=0 x2=0 y2=0
# data: 00020BB9
DITL_180_SplitSel.txt
# 8 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=304 y1=123 x2=374 y2=148
# text: "Done"
# item 1: BUTTON (0x04) enabled
# bounds: x1=304 y1=83 x2=374 y2=108
# text: "Cancel"
# item 2: BUTTON (0x04) enabled
# bounds: x1=304 y1=48 x2=374 y2=73
# text: "Help"
# item 3: CUSTOM (0x80) disabled
# bounds: x1=304 y1=123 x2=374 y2=148
# data: ""
# item 4: CUSTOM (0x00) enabled
# bounds: x1=10 y1=28 x2=170 y2=148
# data: ""
# item 5: RADIO_BUTTON (0x06) enabled
# bounds: x1=184 y1=29 x2=254 y2=49
# text: "Keep"
# item 6: RADIO_BUTTON (0x06) enabled
# bounds: x1=184 y1=59 x2=254 y2=79
# text: "Drop"
# item 7: TEXT (0x88) disabled
# bounds: x1=10 y1=5 x2=349 y2=23
# text: "Select the columns that you want to keep or drop."
DITL_181.txt
# 3 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=258 y1=141 x2=316 y2=161
# text: "OK"
# item 1: BUTTON (0x04) enabled
# bounds: x1=178 y1=141 x2=236 y2=161
# text: "Cancel"
# item 2: TEXT (0x88) disabled
# bounds: x1=66 y1=14 x2=316 y2=127
# text: "XTND document translation support is required to save the journal. Because XTND has not been installed on this machine, the Save commands are disabled. However, you can print the journal using the Print command on the File menu."
DITL_182_NLin.txt
# 20 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=313 y1=257 x2=383 y2=282
# text: "OK"
# item 1: BUTTON (0x04) enabled
# bounds: x1=235 y1=257 x2=305 y2=282
# text: "Cancel"
# item 2: BUTTON (0x04) enabled
# bounds: x1=157 y1=257 x2=227 y2=282
# text: "Help"
# item 3: CUSTOM (0x00) enabled
# bounds: x1=313 y1=257 x2=383 y2=282
# data: ""
# item 4: TEXT (0x88) disabled
# bounds: x1=136 y1=1 x2=283 y2=17
# text: "Nonlinear Regression:"
# item 5: TEXT (0x88) disabled
# bounds: x1=10 y1=53 x2=400 y2=73
# text: "Columns from %0"
# item 6: CUSTOM (0x00) enabled
# bounds: x1=10 y1=78 x2=170 y2=248
# data: ""
# item 7: CUSTOM (0x00) enabled
# bounds: x1=262 y1=74 x2=412 y2=149
# data: ""
# item 8: CUSTOM (0x00) enabled
# bounds: x1=262 y1=153 x2=412 y2=173
# data: ""
# item 9: CUSTOM (0x00) enabled
# bounds: x1=262 y1=178 x2=412 y2=198
# data: ""
# item 10: CUSTOM (0x00) enabled
# bounds: x1=262 y1=203 x2=412 y2=223
# data: ""
# item 11: CUSTOM (0x00) enabled
# bounds: x1=262 y1=228 x2=412 y2=248
# data: ""
# item 12: BUTTON (0x04) enabled
# bounds: x1=175 y1=123 x2=255 y2=143
# text: "Remove"
# item 13: BUTTON (0x04) enabled
# bounds: x1=175 y1=93 x2=255 y2=113
# text: "» X »"
# item 14: BUTTON (0x04) enabled
# bounds: x1=175 y1=153 x2=255 y2=173
# text: "» Y »"
# item 15: BUTTON (0x04) enabled
# bounds: x1=175 y1=178 x2=255 y2=198
# text: "» Weight »"
# item 16: BUTTON (0x04) enabled
# bounds: x1=175 y1=203 x2=255 y2=223
# text: "» Freq »"
# item 17: BUTTON (0x04) enabled
# bounds: x1=175 y1=228 x2=255 y2=248
# text: "»Loss »"
# item 18: CHECKBOX (0x05) enabled
# bounds: x1=11 y1=262 x2=153 y2=280
# text: "Formula Pictures"
# item 19: TEXT (0x88) disabled
# bounds: x1=10 y1=19 x2=400 y2=53
# text: "The X variable should have a formula to predict Y with parameters to be estimated. "
DITL_183_Survival.txt
# 22 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=383 y1=245 x2=453 y2=267
# text: "OK"
# item 1: BUTTON (0x04) enabled
# bounds: x1=295 y1=245 x2=365 y2=267
# text: "Cancel"
# item 2: BUTTON (0x04) enabled
# bounds: x1=295 y1=219 x2=365 y2=241
# text: "Help"
# item 3: CUSTOM (0x00) enabled
# bounds: x1=383 y1=245 x2=453 y2=267
# data: ""
# item 4: TEXT (0x88) disabled
# bounds: x1=176 y1=1 x2=290 y2=17
# text: "Survival Curves:"
# item 5: TEXT (0x88) disabled
# bounds: x1=10 y1=36 x2=347 y2=56
# text: "Columns from %0"
# item 6: CUSTOM (0x00) enabled
# bounds: x1=10 y1=64 x2=170 y2=211
# data: ""
# item 7: CUSTOM (0x00) enabled
# bounds: x1=311 y1=153 x2=461 y2=213
# data: ""
# item 8: CUSTOM (0x00) enabled
# bounds: x1=310 y1=57 x2=460 y2=77
# data: ""
# item 9: CUSTOM (0x00) enabled
# bounds: x1=310 y1=81 x2=460 y2=101
# data: ""
# item 10: CUSTOM (0x00) enabled
# bounds: x1=310 y1=129 x2=460 y2=149
# data: ""
# item 11: CUSTOM (0x00) enabled
# bounds: x1=310 y1=105 x2=460 y2=125
# data: ""
# item 12: BUTTON (0x04) enabled
# bounds: x1=189 y1=153 x2=286 y2=173
# text: "Remove"
# item 13: BUTTON (0x04) enabled
# bounds: x1=189 y1=177 x2=286 y2=197
# text: "> Covariates >"
# item 14: BUTTON (0x04) enabled
# bounds: x1=189 y1=57 x2=286 y2=77
# text: "> Time >"
# item 15: BUTTON (0x04) enabled
# bounds: x1=189 y1=81 x2=286 y2=101
# text: "> Censor >"
# item 16: BUTTON (0x04) enabled
# bounds: x1=189 y1=129 x2=286 y2=149
# text: "> Freq >"
# item 17: BUTTON (0x04) enabled
# bounds: x1=189 y1=105 x2=286 y2=125
# text: "> Grouping >"
# item 18: RADIO_BUTTON (0x06) enabled
# bounds: x1=349 y1=19 x2=633 y2=36
# text: "Product Limit Method (Kaplan-Meier)"
# item 19: RADIO_BUTTON (0x06) enabled
# bounds: x1=349 y1=38 x2=633 y2=55
# text: "Life Table Method (Actuarial)"
# item 20: BUTTON (0x04) enabled
# bounds: x1=12 y1=219 x2=284 y2=241
# text: "Help for Proportional Hazards Modeling"
# item 21: BUTTON (0x04) enabled
# bounds: x1=12 y1=245 x2=284 y2=267
# text: "Help for Parametric Survival Modeling"
DITL_184_Cluster.txt
# 24 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=318 y1=261 x2=388 y2=281
# text: "OK"
# item 1: BUTTON (0x04) enabled
# bounds: x1=240 y1=261 x2=310 y2=281
# text: "Cancel"
# item 2: BUTTON (0x04) enabled
# bounds: x1=162 y1=261 x2=232 y2=281
# text: "Help"
# item 3: CUSTOM (0x00) enabled
# bounds: x1=318 y1=261 x2=388 y2=281
# data: ""
# item 4: TEXT (0x88) disabled
# bounds: x1=11 y1=40 x2=167 y2=77
# text: "Columns from \n%0"
# item 5: CUSTOM (0x00) enabled
# bounds: x1=12 y1=81 x2=157 y2=286
# data: ""
# item 6: CUSTOM (0x00) enabled
# bounds: x1=240 y1=141 x2=408 y2=229
# data: ""
# item 7: CUSTOM (0x00) enabled
# bounds: x1=240 y1=232 x2=408 y2=254
# data: ""
# item 8: BUTTON (0x04) enabled
# bounds: x1=162 y1=209 x2=232 y2=229
# text: "Remove"
# item 9: BUTTON (0x04) enabled
# bounds: x1=162 y1=162 x2=232 y2=182
# text: "> Y >"
# item 10: BUTTON (0x04) enabled
# bounds: x1=162 y1=233 x2=232 y2=253
# text: "> Label >"
# item 11: RADIO_BUTTON (0x06) enabled
# bounds: x1=329 y1=20 x2=426 y2=38
# text: "Average"
# item 12: RADIO_BUTTON (0x06) enabled
# bounds: x1=329 y1=38 x2=426 y2=56
# text: "Centroid"
# item 13: RADIO_BUTTON (0x06) enabled
# bounds: x1=329 y1=56 x2=453 y2=74
# text: "Ward\'s Method"
# item 14: RADIO_BUTTON (0x06) enabled
# bounds: x1=329 y1=74 x2=458 y2=92
# text: "Single Linkage"
# item 15: RADIO_BUTTON (0x06) enabled
# bounds: x1=329 y1=92 x2=475 y2=110
# text: "Complete Linkage"
# item 16: TEXT (0x88) disabled
# bounds: x1=11 y1=0 x2=128 y2=18
# text: "Cluster Analysis"
# item 17: CHECKBOX (0x05) enabled
# bounds: x1=11 y1=20 x2=148 y2=38
# text: "Standardize Data"
# item 18: RADIO_BUTTON (0x06) enabled
# bounds: x1=172 y1=20 x2=291 y2=40
# text: "Hierarchical "
# item 19: RADIO_BUTTON (0x06) enabled
# bounds: x1=172 y1=76 x2=260 y2=95
# text: "K-Means "
# item 20: TEXT (0x88) disabled
# bounds: x1=188 y1=40 x2=316 y2=74
# text: "(for up to \n hundreds of rows)"
# item 21: TEXT (0x88) disabled
# bounds: x1=187 y1=95 x2=312 y2=112
# text: "(for larger tables)"
# item 22: EDIT_TEXT (0x10) enabled
# bounds: x1=376 y1=117 x2=420 y2=133
# text: ""
# item 23: TEXT (0x88) disabled
# bounds: x1=188 y1=118 x2=369 y2=135
# text: "Enter Number of Clusters:"
DITL_185_Save Journal.txt
# 3 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=151 y1=53 x2=218 y2=73
# text: "Save"
# item 1: BUTTON (0x04) enabled
# bounds: x1=52 y1=53 x2=139 y2=73
# text: "Don’t Save"
# item 2: TEXT (0x88) disabled
# bounds: x1=56 y1=8 x2=220 y2=42
# text: "Save Window Contents to Journal?"
DITL_186_HiddenAlert.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=130 y1=95 x2=200 y2=120
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=10 y1=10 x2=280 y2=80
# text: "Data table “^0” has hidden columns. They will be reshown."
DITL_187_Bad LHS.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=248 y1=73 x2=308 y2=93
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=80 y1=8 x2=308 y2=60
# text: "The selected expression cannot be assigned to. Please change it to a column or variable name."
DITL_190_CusumParms.txt
# 18 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=245 y1=235 x2=315 y2=260
# text: "Done"
# item 1: BUTTON (0x04) enabled
# bounds: x1=145 y1=235 x2=215 y2=260
# text: "Cancel"
# item 2: BUTTON (0x04) enabled
# bounds: x1=45 y1=235 x2=115 y2=260
# text: "Help"
# item 3: CUSTOM (0x80) disabled
# bounds: x1=245 y1=235 x2=315 y2=260
# data: ""
# item 4: BUTTON (0x04) enabled
# bounds: x1=200 y1=190 x2=340 y2=215
# text: "Set for selected vars"
# item 5: CUSTOM (0x80) disabled
# bounds: x1=10 y1=55 x2=180 y2=215
# data: ""
# item 6: EDIT_TEXT (0x10) enabled
# bounds: x1=280 y1=55 x2=350 y2=75
# text: ""
# item 7: EDIT_TEXT (0x10) enabled
# bounds: x1=280 y1=80 x2=350 y2=100
# text: ""
# item 8: EDIT_TEXT (0x10) enabled
# bounds: x1=280 y1=105 x2=350 y2=125
# text: ""
# item 9: EDIT_TEXT (0x10) enabled
# bounds: x1=280 y1=130 x2=350 y2=150
# text: ""
# item 10: EDIT_TEXT (0x10) enabled
# bounds: x1=280 y1=155 x2=350 y2=175
# text: ""
# item 11: TEXT (0x88) disabled
# bounds: x1=190 y1=55 x2=270 y2=75
# text: "Target :"
# item 12: TEXT (0x88) disabled
# bounds: x1=190 y1=80 x2=270 y2=100
# text: "Delta :"
# item 13: TEXT (0x88) disabled
# bounds: x1=190 y1=105 x2=270 y2=125
# text: "Shift :"
# item 14: TEXT (0x88) disabled
# bounds: x1=190 y1=130 x2=270 y2=150
# text: "Sigma :"
# item 15: TEXT (0x88) disabled
# bounds: x1=190 y1=155 x2=270 y2=175
# text: "Head Start :"
# item 16: TEXT (0x88) disabled
# bounds: x1=10 y1=10 x2=180 y2=50
# text: "Select process variables."
# item 17: TEXT (0x88) disabled
# bounds: x1=190 y1=10 x2=350 y2=50
# text: "Enter values for the selected variables"
DITL_191_TernContours.txt
# 12 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=220 y1=206 x2=290 y2=231
# text: "Done"
# item 1: BUTTON (0x04) enabled
# bounds: x1=120 y1=206 x2=190 y2=231
# text: "Cancel"
# item 2: BUTTON (0x04) enabled
# bounds: x1=20 y1=206 x2=90 y2=231
# text: "Help"
# item 3: CUSTOM (0x00) enabled
# bounds: x1=220 y1=206 x2=290 y2=231
# data: ""
# item 4: CUSTOM (0x00) enabled
# bounds: x1=10 y1=66 x2=170 y2=191
# data: ""
# item 5: RADIO_BUTTON (0x06) enabled
# bounds: x1=200 y1=91 x2=290 y2=111
# text: "Default"
# item 6: RADIO_BUTTON (0x06) enabled
# bounds: x1=200 y1=116 x2=290 y2=136
# text: "Specify…"
# item 7: RADIO_BUTTON (0x06) enabled
# bounds: x1=200 y1=141 x2=290 y2=161
# text: "Retrieve…"
# item 8: CHECKBOX (0x05) enabled
# bounds: x1=180 y1=171 x2=290 y2=191
# text: "Fill Areas"
# item 9: TEXT (0x88) disabled
# bounds: x1=10 y1=41 x2=290 y2=61
# text: "Please select the response variable"
# item 10: TEXT (0x88) disabled
# bounds: x1=180 y1=66 x2=290 y2=86
# text: "Contour Values:"
# item 11: TEXT (0x88) disabled
# bounds: x1=10 y1=10 x2=295 y2=30
# text: "Table"
DITL_195_Contours.txt
# 22 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=275 y1=259 x2=355 y2=284
# text: "Done"
# item 1: BUTTON (0x04) enabled
# bounds: x1=160 y1=259 x2=240 y2=284
# text: "Cancel"
# item 2: BUTTON (0x04) enabled
# bounds: x1=50 y1=259 x2=130 y2=284
# text: "Help"
# item 3: CUSTOM (0x00) enabled
# bounds: x1=275 y1=259 x2=355 y2=284
# data: ""
# item 4: TEXT (0x88) disabled
# bounds: x1=10 y1=21 x2=390 y2=54
# text: "Please specify 2 numeric X columns (3 if ternary coordinates) and 1 numeric Y column. "
# item 5: TEXT (0x88) disabled
# bounds: x1=10 y1=69 x2=390 y2=89
# text: "Columns from %0"
# item 6: TEXT (0x88) disabled
# bounds: x1=5 y1=189 x2=115 y2=209
# text: "Contour Values:"
# item 7: TEXT (0x88) disabled
# bounds: x1=5 y1=209 x2=115 y2=229
# text: "Display :"
# item 8: TEXT (0x88) disabled
# bounds: x1=5 y1=229 x2=115 y2=249
# text: "Data:"
# item 9: CUSTOM (0x00) enabled
# bounds: x1=10 y1=89 x2=160 y2=179
# data: ""
# item 10: CUSTOM (0x00) enabled
# bounds: x1=235 y1=89 x2=390 y2=149
# data: ""
# item 11: CUSTOM (0x00) enabled
# bounds: x1=235 y1=154 x2=390 y2=179
# data: ""
# item 12: BUTTON (0x04) enabled
# bounds: x1=165 y1=129 x2=225 y2=149
# text: "Remove"
# item 13: BUTTON (0x04) enabled
# bounds: x1=165 y1=94 x2=225 y2=114
# text: "» X »"
# item 14: BUTTON (0x04) enabled
# bounds: x1=165 y1=154 x2=225 y2=174
# text: "» Y »"
# item 15: RADIO_BUTTON (0x06) enabled
# bounds: x1=115 y1=189 x2=185 y2=209
# text: "Default"
# item 16: RADIO_BUTTON (0x06) enabled
# bounds: x1=190 y1=189 x2=275 y2=209
# text: "Specify…"
# item 17: RADIO_BUTTON (0x06) enabled
# bounds: x1=280 y1=189 x2=375 y2=209
# text: "Retrieve…"
# item 18: CHECKBOX (0x05) enabled
# bounds: x1=115 y1=209 x2=230 y2=229
# text: "Fill Areas"
# item 19: CHECKBOX (0x05) enabled
# bounds: x1=115 y1=229 x2=240 y2=249
# text: "Use Table Data"
# item 20: BUTTON (0x04) enabled
# bounds: x1=260 y1=229 x2=370 y2=249
# text: "Specify grid…"
# item 21: TEXT (0x88) disabled
# bounds: x1=146 y1=4 x2=246 y2=20
# text: "CONTOUR PLOT:"
DITL_196_ContGrids.txt
# 20 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=300 y1=190 x2=370 y2=215
# text: "Done"
# item 1: BUTTON (0x04) enabled
# bounds: x1=200 y1=190 x2=270 y2=215
# text: "Cancel"
# item 2: BUTTON (0x04) enabled
# bounds: x1=100 y1=190 x2=170 y2=215
# text: "Help"
# item 3: CUSTOM (0x80) disabled
# bounds: x1=299 y1=190 x2=369 y2=215
# data: ""
# item 4: TEXT (0x88) disabled
# bounds: x1=5 y1=55 x2=105 y2=75
# text: "Columns:"
# item 5: TEXT (0x88) disabled
# bounds: x1=110 y1=54 x2=245 y2=74
# text: "%0"
# item 6: TEXT (0x88) disabled
# bounds: x1=255 y1=54 x2=390 y2=74
# text: "%0"
# item 7: EDIT_TEXT (0x90) disabled
# bounds: x1=110 y1=79 x2=245 y2=99
# text: "10"
# item 8: EDIT_TEXT (0x90) disabled
# bounds: x1=110 y1=104 x2=245 y2=124
# text: ""
# item 9: EDIT_TEXT (0x90) disabled
# bounds: x1=110 y1=129 x2=245 y2=149
# text: ""
# item 10: EDIT_TEXT (0x90) disabled
# bounds: x1=110 y1=154 x2=245 y2=174
# text: ""
# item 11: EDIT_TEXT (0x90) disabled
# bounds: x1=255 y1=79 x2=390 y2=99
# text: "10"
# item 12: EDIT_TEXT (0x90) disabled
# bounds: x1=255 y1=104 x2=390 y2=124
# text: ""
# item 13: EDIT_TEXT (0x90) disabled
# bounds: x1=255 y1=129 x2=390 y2=149
# text: ""
# item 14: EDIT_TEXT (0x90) disabled
# bounds: x1=255 y1=154 x2=390 y2=174
# text: ""
# item 15: TEXT (0x88) disabled
# bounds: x1=5 y1=79 x2=105 y2=99
# text: "# of intervals:"
# item 16: TEXT (0x88) disabled
# bounds: x1=5 y1=104 x2=105 y2=124
# text: "Minimum:"
# item 17: TEXT (0x88) disabled
# bounds: x1=5 y1=129 x2=105 y2=149
# text: "Maximum:"
# item 18: TEXT (0x88) disabled
# bounds: x1=5 y1=154 x2=105 y2=174
# text: "Increment:"
# item 19: TEXT (0x88) disabled
# bounds: x1=5 y1=10 x2=385 y2=50
# text: "To define the grid, please specify any 3 of the 4 parameters for each coordinate."
DITL_200_bugNilPtr.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=88 y1=112 x2=148 y2=132
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=80 y1=8 x2=328 y2=96
# text: "A programming error has been detected.\n\nThe document pointer is NIL."
DITL_201_Pref Univariate.txt
# 19 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=254 y1=189 x2=323 y2=209
# text: "Save"
# item 1: BUTTON (0x04) enabled
# bounds: x1=254 y1=154 x2=323 y2=176
# text: "Cancel"
# item 2: BUTTON (0x04) enabled
# bounds: x1=231 y1=115 x2=345 y2=138
# text: "Restore Default"
# item 3: CHECKBOX (0x05) enabled
# bounds: x1=17 y1=27 x2=123 y2=45
# text: "Text Report"
# item 4: CHECKBOX (0x05) enabled
# bounds: x1=17 y1=45 x2=123 y2=63
# text: "Histogram"
# item 5: CHECKBOX (0x05) enabled
# bounds: x1=17 y1=63 x2=123 y2=81
# text: "Mosaic Plot"
# item 6: CHECKBOX (0x05) enabled
# bounds: x1=17 y1=81 x2=148 y2=99
# text: "Outlier Box Plot"
# item 7: CHECKBOX (0x05) enabled
# bounds: x1=17 y1=99 x2=157 y2=117
# text: "Quantile Box Plot"
# item 8: CHECKBOX (0x05) enabled
# bounds: x1=17 y1=117 x2=177 y2=135
# text: "Normal Quantile Plot"
# item 9: CHECKBOX (0x05) enabled
# bounds: x1=17 y1=135 x2=171 y2=153
# text: "Horizontal Layout"
# item 10: CHECKBOX (0x05) enabled
# bounds: x1=17 y1=153 x2=132 y2=171
# text: "Normal Curve"
# item 11: CHECKBOX (0x05) enabled
# bounds: x1=17 y1=171 x2=123 y2=189
# text: "Count Axis"
# item 12: CHECKBOX (0x05) enabled
# bounds: x1=17 y1=189 x2=123 y2=207
# text: "Prob Axis"
# item 13: CHECKBOX (0x05) enabled
# bounds: x1=17 y1=207 x2=138 y2=225
# text: "Uniform"
# item 14: CHECKBOX (0x05) enabled
# bounds: x1=185 y1=29 x2=334 y2=47
# text: "Reveal Quantiles"
# item 15: CHECKBOX (0x05) enabled
# bounds: x1=185 y1=47 x2=328 y2=65
# text: "Reveal Moments"
# item 16: CHECKBOX (0x05) enabled
# bounds: x1=185 y1=65 x2=340 y2=83
# text: "Reveal Frequencies"
# item 17: CUSTOM (0x80) disabled
# bounds: x1=254 y1=189 x2=323 y2=209
# data: ""
# item 18: TEXT (0x88) disabled
# bounds: x1=61 y1=8 x2=301 y2=26
# text: "Preferences for Distribution of Y\'s"
DITL_203_Pref Fit Contin-Nom.txt
# 27 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=261 y1=271 x2=330 y2=293
# text: "Save"
# item 1: BUTTON (0x04) enabled
# bounds: x1=261 y1=243 x2=330 y2=265
# text: "Cancel"
# item 2: BUTTON (0x04) enabled
# bounds: x1=238 y1=216 x2=352 y2=238
# text: "Restore Default"
# item 3: CHECKBOX (0x05) enabled
# bounds: x1=9 y1=67 x2=99 y2=85
# text: "Quantiles"
# item 4: CHECKBOX (0x05) enabled
# bounds: x1=9 y1=85 x2=168 y2=103
# text: "Means,Anova/t-Test"
# item 5: CHECKBOX (0x05) enabled
# bounds: x1=9 y1=103 x2=203 y2=121
# text: "Means, Std Dev, Std Error"
# item 6: CHECKBOX (0x05) enabled
# bounds: x1=9 y1=121 x2=172 y2=139
# text: "Compare Each Pair"
# item 7: CHECKBOX (0x05) enabled
# bounds: x1=9 y1=139 x2=149 y2=157
# text: "Compare All Pairs"
# item 8: CHECKBOX (0x05) enabled
# bounds: x1=9 y1=157 x2=169 y2=175
# text: "Compare with Best"
# item 9: CHECKBOX (0x05) enabled
# bounds: x1=9 y1=175 x2=180 y2=193
# text: "Compare with Control"
# item 10: CHECKBOX (0x05) enabled
# bounds: x1=9 y1=193 x2=143 y2=211
# text: "Nonpar-Wilcoxon"
# item 11: CHECKBOX (0x05) enabled
# bounds: x1=9 y1=211 x2=141 y2=229
# text: "Nonpar-Median"
# item 12: CHECKBOX (0x05) enabled
# bounds: x1=9 y1=229 x2=161 y2=247
# text: "Nonpar-VW"
# item 13: CHECKBOX (0x05) enabled
# bounds: x1=10 y1=247 x2=162 y2=265
# text: "Unequal Variances"
# item 14: CHECKBOX (0x05) enabled
# bounds: x1=215 y1=67 x2=334 y2=84
# text: "Show Points"
# item 15: CHECKBOX (0x05) enabled
# bounds: x1=215 y1=84 x2=349 y2=102
# text: "Quantile Boxes"
# item 16: CHECKBOX (0x05) enabled
# bounds: x1=215 y1=102 x2=368 y2=120
# text: "Means Diamonds"
# item 17: CHECKBOX (0x05) enabled
# bounds: x1=215 y1=120 x2=390 y2=138
# text: "Means Dots, Error Bars"
# item 18: CHECKBOX (0x05) enabled
# bounds: x1=215 y1=138 x2=355 y2=156
# text: "Std Dev Lines"
# item 19: CHECKBOX (0x05) enabled
# bounds: x1=215 y1=156 x2=375 y2=174
# text: "Comparison Circles"
# item 20: CHECKBOX (0x05) enabled
# bounds: x1=215 y1=174 x2=369 y2=192
# text: "Connect Means"
# item 21: CHECKBOX (0x05) enabled
# bounds: x1=215 y1=192 x2=378 y2=210
# text: "X-axis proportional"
# item 22: CUSTOM (0x80) disabled
# bounds: x1=261 y1=271 x2=330 y2=293
# data: ""
# item 23: TEXT (0x88) disabled
# bounds: x1=41 y1=5 x2=223 y2=23
# text: "Preferences for Fit Y by X: "
# item 24: TEXT (0x88) disabled
# bounds: x1=41 y1=24 x2=329 y2=40
# text: "Oneway Layout, Continuous by Nominal"
# item 25: TEXT (0x88) disabled
# bounds: x1=25 y1=47 x2=147 y2=63
# text: "Analysis Options"
# item 26: TEXT (0x88) disabled
# bounds: x1=231 y1=47 x2=353 y2=63
# text: "Display Options"
DITL_204_Pref Fit Nom-Nom.txt
# 18 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=245 y1=241 x2=314 y2=263
# text: "Save"
# item 1: BUTTON (0x04) enabled
# bounds: x1=245 y1=206 x2=314 y2=228
# text: "Cancel"
# item 2: BUTTON (0x04) enabled
# bounds: x1=222 y1=172 x2=336 y2=194
# text: "Restore Default"
# item 3: CHECKBOX (0x05) enabled
# bounds: x1=26 y1=65 x2=134 y2=83
# text: "Mosaic Plot"
# item 4: CHECKBOX (0x05) enabled
# bounds: x1=26 y1=83 x2=122 y2=101
# text: "Crosstabs"
# item 5: CHECKBOX (0x05) enabled
# bounds: x1=26 y1=101 x2=102 y2=119
# text: "Tests"
# item 6: CHECKBOX (0x05) enabled
# bounds: x1=26 y1=119 x2=218 y2=137
# text: "Correspondence Analysis"
# item 7: CHECKBOX (0x05) enabled
# bounds: x1=99 y1=141 x2=171 y2=158
# text: "Count"
# item 8: CHECKBOX (0x05) enabled
# bounds: x1=99 y1=158 x2=180 y2=176
# text: "Total %"
# item 9: CHECKBOX (0x05) enabled
# bounds: x1=99 y1=176 x2=169 y2=194
# text: "Row %"
# item 10: CHECKBOX (0x05) enabled
# bounds: x1=99 y1=194 x2=179 y2=212
# text: "Col %"
# item 11: CHECKBOX (0x05) enabled
# bounds: x1=99 y1=212 x2=191 y2=230
# text: "Expected"
# item 12: CHECKBOX (0x05) enabled
# bounds: x1=99 y1=230 x2=195 y2=248
# text: "Deviation"
# item 13: CHECKBOX (0x05) enabled
# bounds: x1=99 y1=248 x2=203 y2=266
# text: "Cell Chi^2"
# item 14: CUSTOM (0x80) disabled
# bounds: x1=245 y1=241 x2=314 y2=263
# data: ""
# item 15: TEXT (0x88) disabled
# bounds: x1=43 y1=10 x2=225 y2=28
# text: "Preferences for Fit Y by X: "
# item 16: TEXT (0x88) disabled
# bounds: x1=43 y1=29 x2=317 y2=46
# text: "Contingency Table, Nominal by Nominal"
# item 17: TEXT (0x88) disabled
# bounds: x1=26 y1=142 x2=88 y2=176
# text: "Crosstab\nOptions"
DITL_205_Pref Fit Model - Nominal.txt
# 8 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=244 y1=100 x2=313 y2=122
# text: "Save"
# item 1: BUTTON (0x04) enabled
# bounds: x1=244 y1=68 x2=313 y2=90
# text: "Cancel"
# item 2: BUTTON (0x04) enabled
# bounds: x1=221 y1=36 x2=335 y2=58
# text: "Restore Default"
# item 3: CHECKBOX (0x05) enabled
# bounds: x1=11 y1=40 x2=202 y2=58
# text: "Likelihood Ratio Tests"
# item 4: CHECKBOX (0x05) enabled
# bounds: x1=11 y1=58 x2=180 y2=76
# text: "Confidence Intervals"
# item 5: CHECKBOX (0x05) enabled
# bounds: x1=11 y1=76 x2=134 y2=94
# text: "Odds Ratios"
# item 6: CUSTOM (0x80) disabled
# bounds: x1=244 y1=100 x2=313 y2=122
# data: ""
# item 7: TEXT (0x88) disabled
# bounds: x1=24 y1=10 x2=318 y2=28
# text: "Preferences for Fit Model: Nominal/Ordinal"
DITL_206_Pref Fit Model - Std LS.txt
# 15 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=288 y1=186 x2=357 y2=208
# text: "Save"
# item 1: BUTTON (0x04) enabled
# bounds: x1=288 y1=151 x2=357 y2=173
# text: "Cancel"
# item 2: BUTTON (0x04) enabled
# bounds: x1=265 y1=113 x2=379 y2=135
# text: "Restore Default"
# item 3: CHECKBOX (0x05) enabled
# bounds: x1=27 y1=34 x2=189 y2=52
# text: "Plot Y by Predicted"
# item 4: CHECKBOX (0x05) enabled
# bounds: x1=27 y1=52 x2=186 y2=70
# text: "Plot Residual"
# item 5: CHECKBOX (0x05) enabled
# bounds: x1=27 y1=70 x2=221 y2=88
# text: "Plot Effect Leverages"
# item 6: CHECKBOX (0x05) enabled
# bounds: x1=27 y1=88 x2=160 y2=106
# text: "Show Points"
# item 7: CHECKBOX (0x05) enabled
# bounds: x1=27 y1=106 x2=167 y2=124
# text: "Show Line of Fit"
# item 8: CHECKBOX (0x05) enabled
# bounds: x1=27 y1=124 x2=217 y2=142
# text: "Show Confidence Curves"
# item 9: CHECKBOX (0x05) enabled
# bounds: x1=27 y1=142 x2=219 y2=160
# text: "Connect Points to Line"
# item 10: CHECKBOX (0x05) enabled
# bounds: x1=27 y1=160 x2=161 y2=178
# text: "Sequential SS"
# item 11: CHECKBOX (0x05) enabled
# bounds: x1=27 y1=178 x2=193 y2=196
# text: "Durbin-Watson Test"
# item 12: CHECKBOX (0x05) enabled
# bounds: x1=27 y1=196 x2=214 y2=214
# text: "Correlation of Estimates"
# item 13: CUSTOM (0x80) disabled
# bounds: x1=288 y1=186 x2=357 y2=208
# data: ""
# item 14: TEXT (0x88) disabled
# bounds: x1=29 y1=10 x2=372 y2=28
# text: "Preferences for Fit Model: Standard Least Squares"
DITL_207_Pref Fit Model - Screening.txt
# 10 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=269 y1=120 x2=338 y2=142
# text: "Save"
# item 1: BUTTON (0x04) enabled
# bounds: x1=269 y1=85 x2=338 y2=107
# text: "Cancel"
# item 2: BUTTON (0x04) enabled
# bounds: x1=246 y1=49 x2=360 y2=71
# text: "Restore Default"
# item 3: CHECKBOX (0x05) enabled
# bounds: x1=39 y1=46 x2=135 y2=64
# text: "Profiler"
# item 4: CHECKBOX (0x05) enabled
# bounds: x1=39 y1=64 x2=230 y2=82
# text: "Box-Cox Transformation"
# item 5: CHECKBOX (0x05) enabled
# bounds: x1=39 y1=82 x2=147 y2=100
# text: "Cube Plots"
# item 6: CHECKBOX (0x05) enabled
# bounds: x1=39 y1=100 x2=192 y2=119
# text: "Effect Screening"
# item 7: CHECKBOX (0x05) enabled
# bounds: x1=39 y1=119 x2=172 y2=137
# text: "Interaction Plots"
# item 8: TEXT (0x88) disabled
# bounds: x1=60 y1=10 x2=308 y2=28
# text: "Preferences for Fit Model: Screening"
# item 9: CUSTOM (0x80) disabled
# bounds: x1=269 y1=120 x2=338 y2=142
# data: ""
DITL_208_Pref Correlations.txt
# 13 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=331 y1=152 x2=400 y2=174
# text: "Save"
# item 1: BUTTON (0x04) enabled
# bounds: x1=331 y1=117 x2=400 y2=139
# text: "Cancel"
# item 2: BUTTON (0x04) enabled
# bounds: x1=308 y1=82 x2=422 y2=104
# text: "Restore Default"
# item 3: CHECKBOX (0x05) enabled
# bounds: x1=28 y1=38 x2=233 y2=56
# text: "Correlations - Multivariate"
# item 4: CHECKBOX (0x05) enabled
# bounds: x1=28 y1=56 x2=212 y2=74
# text: "Correlations - Inverse"
# item 5: CHECKBOX (0x05) enabled
# bounds: x1=28 y1=74 x2=202 y2=92
# text: "Correlations - Partial"
# item 6: CHECKBOX (0x05) enabled
# bounds: x1=28 y1=92 x2=222 y2=110
# text: "Correlations - Pairwise"
# item 7: CHECKBOX (0x05) enabled
# bounds: x1=28 y1=110 x2=246 y2=128
# text: "Correlations - Nonparametric"
# item 8: CHECKBOX (0x05) enabled
# bounds: x1=28 y1=128 x2=199 y2=146
# text: "Scatterplot Matrix"
# item 9: CHECKBOX (0x05) enabled
# bounds: x1=28 y1=146 x2=181 y2=164
# text: "Outlier Analysis"
# item 10: CHECKBOX (0x05) enabled
# bounds: x1=28 y1=164 x2=311 y2=182
# text: "Principal Components / Factor Analysis"
# item 11: CUSTOM (0x80) disabled
# bounds: x1=331 y1=152 x2=400 y2=174
# data: ""
# item 12: TEXT (0x88) disabled
# bounds: x1=43 y1=10 x2=267 y2=28
# text: "Preferences for Correlations: "
DITL_209_Pref Survival.txt
# 10 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=239 y1=110 x2=308 y2=132
# text: "Save"
# item 1: BUTTON (0x04) enabled
# bounds: x1=239 y1=75 x2=308 y2=97
# text: "Cancel"
# item 2: BUTTON (0x04) enabled
# bounds: x1=216 y1=40 x2=330 y2=62
# text: "Restore Default"
# item 3: CHECKBOX (0x05) enabled
# bounds: x1=28 y1=41 x2=136 y2=59
# text: "Show Points"
# item 4: CHECKBOX (0x05) enabled
# bounds: x1=28 y1=59 x2=157 y2=77
# text: "Show Combined"
# item 5: CHECKBOX (0x05) enabled
# bounds: x1=28 y1=77 x2=157 y2=95
# text: "Survival Plot"
# item 6: CHECKBOX (0x05) enabled
# bounds: x1=28 y1=95 x2=179 y2=113
# text: "Exponential Plot"
# item 7: CHECKBOX (0x05) enabled
# bounds: x1=28 y1=113 x2=168 y2=131
# text: "Weibull Plot"
# item 8: CUSTOM (0x80) disabled
# bounds: x1=239 y1=110 x2=308 y2=132
# data: ""
# item 9: TEXT (0x88) disabled
# bounds: x1=77 y1=10 x2=259 y2=28
# text: "Preferences for Survival: "
DITL_210.txt
# 0 entries
DITL_256_Revert.txt
# 3 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=60 y1=90 x2=130 y2=110
# text: "Cancel"
# item 1: BUTTON (0x04) enabled
# bounds: x1=180 y1=90 x2=250 y2=110
# text: "Discard"
# item 2: TEXT (0x88) disabled
# bounds: x1=60 y1=10 x2=250 y2=70
# text: "Do you want to discard all changes made to “^0” ?"
DITL_257_NoDelete.txt
# 3 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=165 y1=47 x2=225 y2=65
# text: "Cancel"
# item 1: BUTTON (0x04) enabled
# bounds: x1=65 y1=47 x2=135 y2=65
# text: "Continue"
# item 2: TEXT (0x88) disabled
# bounds: x1=40 y1=12 x2=270 y2=30
# text: "Cannot delete. Column data in use."
DITL_258_SaveAlert1.txt
# 4 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=230 y1=75 x2=320 y2=100
# text: "Save"
# item 1: BUTTON (0x04) enabled
# bounds: x1=10 y1=75 x2=100 y2=100
# text: "Don’t Save"
# item 2: BUTTON (0x04) enabled
# bounds: x1=120 y1=75 x2=210 y2=100
# text: "Cancel"
# item 3: TEXT (0x88) disabled
# bounds: x1=10 y1=10 x2=320 y2=60
# text: "Save changes to “^0”?"
DITL_260_EmptyAlert.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=130 y1=110 x2=200 y2=135
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=60 y1=10 x2=280 y2=100
# text: "Data table ^0 is empty. Empty spread sheet windows will be closed."
# text: "libname a \'~dave/sasuser\'; proc download data=a.crime; run;"
# item 2: EDIT_TEXT (0x10) enabled
# bounds: x1=52 y1=48 x2=132 y2=64
# text: ""
# item 3: TEXT (0x88) disabled
# bounds: x1=4 y1=76 x2=76 y2=96
# text: "SAS Query:"
# item 4: TEXT (0x88) disabled
# bounds: x1=4 y1=48 x2=48 y2=68
# text: "Port#:"
# item 5: TEXT (0x88) disabled
# bounds: x1=80 y1=0 x2=248 y2=16
# text: "Enter SAS/CONNECT info:"
# item 6: BUTTON (0x04) enabled
# bounds: x1=192 y1=224 x2=256 y2=244
# text: "Cancel"
DITL_400_Edit_ Replace All, Clean.txt
# 3 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=30 y1=87 x2=101 y2=109
# text: "Continue"
# item 1: BUTTON (0x04) enabled
# bounds: x1=204 y1=87 x2=275 y2=109
# text: "Cancel"
# item 2: TEXT (0x88) disabled
# bounds: x1=63 y1=9 x2=301 y2=77
# text: "No changes have been made to this document since it was last saved.\nThis operation can only be undone by using the Revert Command."
DITL_401_Edit_ Replace All, Dirty.txt
# 4 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=29 y1=142 x2=100 y2=164
# text: "Continue"
# item 1: BUTTON (0x04) enabled
# bounds: x1=203 y1=142 x2=274 y2=164
# text: "Cancel"
# item 2: TEXT (0x88) disabled
# bounds: x1=63 y1=9 x2=274 y2=43
# text: "Warning.\nThis operation is not undoable.\n"
# item 3: TEXT (0x88) disabled
# bounds: x1=22 y1=59 x2=241 y2=124
# text: "Because this document has been modified since it was last saved, it is recommended that you save before continuing."
DITL_602.txt
# 7 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=216 y1=8 x2=288 y2=32
# text: "Convert"
# item 1: BUTTON (0x04) enabled
# bounds: x1=216 y1=40 x2=288 y2=64
# text: "Done"
# item 2: CUSTOM (0x80) disabled
# bounds: x1=0 y1=0 x2=0 y2=0
# data: ""
# item 3: TEXT (0x88) disabled
# bounds: x1=16 y1=16 x2=48 y2=32
# text: "In:"
# item 4: TEXT (0x88) disabled
# bounds: x1=16 y1=40 x2=48 y2=56
# text: "Out:"
# item 5: EDIT_TEXT (0x90) disabled
# bounds: x1=56 y1=16 x2=184 y2=32
# text: ""
# item 6: TEXT (0x88) disabled
# bounds: x1=56 y1=40 x2=184 y2=56
# text: ""
DITL_603_Personalize.txt
# 9 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=332 y1=136 x2=392 y2=156
# text: "OK"
# item 1: BUTTON (0x04) enabled
# bounds: x1=250 y1=136 x2=310 y2=156
# text: "Quit"
# item 2: EDIT_TEXT (0x90) disabled
# bounds: x1=114 y1=72 x2=394 y2=88
# text: ""
# item 3: EDIT_TEXT (0x90) disabled
# bounds: x1=114 y1=104 x2=394 y2=120
# text: ""
# item 4: PICTURE (0xC0) disabled
# bounds: x1=0 y1=11 x2=213 y2=55
# PICT resource ID: 129
# item 5: TEXT (0x88) disabled
# bounds: x1=53 y1=72 x2=103 y2=88
# text: "Owner:"
# item 6: TEXT (0x88) disabled
# bounds: x1=11 y1=104 x2=102 y2=120
# text: "Organization:"
# item 7: TEXT (0x88) disabled
# bounds: x1=16 y1=136 x2=216 y2=152
# text: "Please personalize your copy."
# item 8: CUSTOM (0x80) disabled
# bounds: x1=0 y1=0 x2=0 y2=0
# data: ""
DITL_604.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=339 y1=107 x2=399 y2=127
# text: "Quit"
# item 1: TEXT (0x88) disabled
# bounds: x1=88 y1=16 x2=416 y2=96
# text: "JMP must be personalized before you can use it. This copy of JMP is write-protected and cannot be personalized.\n\nPlease remove the protection and try again."
DITL_605.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=269 y1=99 x2=329 y2=119
# text: "Quit"
# item 1: TEXT (0x88) disabled
# bounds: x1=80 y1=8 x2=328 y2=91
# text: "Sorry, but this copy of JMP is corrupt and cannot be used.\n\nPlease get a new copy from your original program disk."
DITL_606_JMPIN.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=297 y1=105 x2=357 y2=125
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=80 y1=10 x2=357 y2=92
# text: "JMP—IN, the introductory version of JMP, is limited to ^0 cells for the following operations: Save, Copy & Paste, and Import."
DITL_607.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=272 y1=106 x2=332 y2=126
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=80 y1=8 x2=332 y2=93
# text: "Memory is getting critically low. You should proceed cautiously.\n\nPlease save your work and close any windows that you aren’t using."
DITL_608.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=279 y1=148 x2=339 y2=168
# text: "Quit"
# item 1: TEXT (0x88) disabled
# bounds: x1=80 y1=8 x2=339 y2=136
# text: "Sorry, but someone else is currently using this copy of JMP with the name “^0.”\n\nPlease use the ^1; or, if the problem persists, restart your machine."
DITL_609.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=269 y1=106 x2=329 y2=126
# text: "Quit"
# item 1: TEXT (0x88) disabled
# bounds: x1=80 y1=8 x2=328 y2=92
# text: "Sorry, but JMP requires System 4.1 or later.\n\nPlease upgrade your system software to latest version."
DITL_610_confirm.txt
# 3 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=110 y1=125 x2=180 y2=150
# text: "Cancel"
# item 1: BUTTON (0x04) enabled
# bounds: x1=240 y1=125 x2=310 y2=150
# text: "OK"
# item 2: TEXT (0x08) enabled
# bounds: x1=65 y1=10 x2=310 y2=100
# text: "The field width of the label column ^0 is greater than 31, the maximum characters allowed for column name. Do you want to truncate the long labels ?"
DITL_611_noAT.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=247 y1=71 x2=307 y2=91
# text: "Quit"
# item 1: TEXT (0x88) disabled
# bounds: x1=80 y1=8 x2=307 y2=57
# text: "Sorry, you must turn on AppleTalk to use JMP. Use the Chooser desk accessory to activate AppleTalk."
DITL_612_badATVers.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=246 y1=102 x2=306 y2=122
# text: "Quit"
# item 1: TEXT (0x88) disabled
# bounds: x1=80 y1=8 x2=307 y2=90
# text: "Sorry, JMP requires version 53 or later of AppleTalk. Please contact your site administrator to install the latest version of AppleTalk before using JMP."
DITL_616.txt
# 6 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=253 y1=176 x2=332 y2=196
# text: "Quit"
# item 1: CUSTOM (0x80) disabled
# bounds: x1=0 y1=0 x2=0 y2=0
# data: ""
# item 2: ICON (0xA0) disabled
# bounds: x1=20 y1=10 x2=52 y2=42
# ICON resource ID: 0
# item 3: TEXT (0x88) disabled
# bounds: x1=80 y1=8 x2=332 y2=58
# text: "Sorry, this copy of JMP cannot be run. It’s configured for these zones, but they’re not on the network."
# item 4: TEXT (0x88) disabled
# bounds: x1=30 y1=161 x2=218 y2=209
# text: "Your site administrator may need to reconfigure JMP to exclude these zones."
# item 5: CUSTOM (0x00) enabled
# bounds: x1=30 y1=70 x2=332 y2=152
# data: ""
DITL_617.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=277 y1=148 x2=337 y2=168
# text: "Quit"
# item 1: TEXT (0x88) disabled
# bounds: x1=80 y1=8 x2=341 y2=138
# text: "Sorry, this copy of JMP isn’t configured for use on the AppleTalk network you are currently connected to.\n\nUse the Network control panel to change your network connection, or use a Macintosh that is connected to the proper network."
DITL_618.txt
# 7 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=243 y1=221 x2=322 y2=241
# text: "Quit"
# item 1: CUSTOM (0x80) disabled
# bounds: x1=0 y1=0 x2=0 y2=0
# data: ""
# item 2: ICON (0xA0) disabled
# bounds: x1=20 y1=10 x2=52 y2=42
# ICON resource ID: 0
# item 3: TEXT (0x88) disabled
# bounds: x1=80 y1=8 x2=321 y2=57
# text: "Sorry, this copy of JMP can only be run from one of the AppleTalk zones listed below."
# item 4: TEXT (0x88) disabled
# bounds: x1=23 y1=66 x2=322 y2=118
# text: "Use the Network control panel to change your current zone, or use a Macintosh that belongs to one of these zones."
# item 5: CUSTOM (0x00) enabled
# bounds: x1=22 y1=128 x2=321 y2=210
# data: ""
# item 6: TEXT (0x88) disabled
# bounds: x1=22 y1=222 x2=228 y2=238
# text: "Your zone: ^ZONE"
DITL_619.txt
# 5 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=270 y1=110 x2=349 y2=130
# text: "OK"
# item 1: BUTTON (0x04) enabled
# bounds: x1=128 y1=110 x2=207 y2=130
# text: "Quit"
# item 2: ICON (0xA0) disabled
# bounds: x1=20 y1=10 x2=52 y2=42
# ICON resource ID: 0
# item 3: EDIT_TEXT (0x90) disabled
# bounds: x1=80 y1=65 x2=350 y2=82
# text: ""
# item 4: TEXT (0x88) disabled
# bounds: x1=80 y1=10 x2=349 y2=47
# text: "Sorry, but this name is currently in use. Please choose a different name."
DITL_620.txt
# 7 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=336 y1=72 x2=415 y2=92
# text: "Try Again"
# item 1: BUTTON (0x04) enabled
# bounds: x1=336 y1=112 x2=415 y2=132
# text: "Quit"
# item 2: CUSTOM (0x80) disabled
# bounds: x1=0 y1=0 x2=0 y2=0
# data: ""
# item 3: ICON (0xA0) disabled
# bounds: x1=20 y1=10 x2=52 y2=42
# ICON resource ID: 0
# item 4: TEXT (0x88) disabled
# bounds: x1=80 y1=8 x2=314 y2=43
# text: "Sorry, there are too many people using this copy of JMP right now."
# item 5: TEXT (0x88) disabled
# bounds: x1=18 y1=145 x2=314 y2=195
# text: "You may ask one of the people listed above to quit and try again, or you may quit now and try later."
# item 6: CUSTOM (0x00) enabled
# bounds: x1=18 y1=56 x2=314 y2=138
# data: ""
DITL_621.txt
# 3 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=231 y1=112 x2=291 y2=132
# text: "OK"
# item 1: BUTTON (0x04) enabled
# bounds: x1=14 y1=112 x2=132 y2=132
# text: "Update License"
# item 2: TEXT (0x88) disabled
# bounds: x1=80 y1=8 x2=291 y2=102
# text: "Your copy of JMP expired on ^0. You may continue to use it until ^1."
DITL_622.txt
# 3 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=232 y1=126 x2=292 y2=146
# text: "Quit"
# item 1: BUTTON (0x04) enabled
# bounds: x1=21 y1=126 x2=143 y2=146
# text: "Update License"
# item 2: TEXT (0x88) disabled
# bounds: x1=80 y1=8 x2=292 y2=120
# text: "Sorry, your copy of JMP expired on ^0. \n\nPlease contact your site administrator to renew your license."
DITL_623.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=221 y1=101 x2=281 y2=121
# text: "Quit"
# item 1: TEXT (0x88) disabled
# bounds: x1=80 y1=8 x2=281 y2=89
# text: "Your system clock is not set correctly. Please use the Alarm Clock desk accessory to set your clock to today’s date before using JMP."
DITL_624.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=187 y1=77 x2=247 y2=97
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=80 y1=8 x2=246 y2=64
# text: "This configuration is incomplete or damaged. Please choose another."
DITL_625.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=180 y1=76 x2=240 y2=96
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=80 y1=8 x2=239 y2=62
# text: "This configuration has already expired. Please choose another."
DITL_1000_getText.txt
# 5 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=30 y1=100 x2=90 y2=120
# text: "OK"
# item 1: BUTTON (0x04) enabled
# bounds: x1=130 y1=100 x2=190 y2=120
# text: "Cancel"
# item 2: CUSTOM (0x00) enabled
# bounds: x1=30 y1=100 x2=90 y2=120
# data: ""
# item 3: TEXT (0x88) disabled
# bounds: x1=30 y1=40 x2=330 y2=58
# text: "^0^1^2"
# item 4: EDIT_TEXT (0x10) enabled
# bounds: x1=30 y1=64 x2=330 y2=82
# text: ""
DITL_1010_OneColList.txt
# 6 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=200 y1=205 x2=270 y2=230
# text: "OK"
# item 1: BUTTON (0x04) enabled
# bounds: x1=105 y1=205 x2=175 y2=230
# text: "Cancel"
# item 2: CUSTOM (0x80) disabled
# bounds: x1=200 y1=205 x2=270 y2=230
# data: ""
# item 3: TEXT (0x08) enabled
# bounds: x1=10 y1=5 x2=280 y2=70
# text: "Select Columns"
# item 4: CUSTOM (0x00) enabled
# bounds: x1=45 y1=80 x2=245 y2=190
# data: ""
# item 5: BUTTON (0x04) enabled
# bounds: x1=10 y1=205 x2=80 y2=230
# text: "Help"
DITL_1023_fileAlert.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=89 y1=163 x2=149 y2=183
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=80 y1=8 x2=328 y2=152
# text: "An error occurred while ^0 the file ^1 on ^2.\n\n^3"
DITL_1128_DOE_ Design Choice.txt
# 24 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=282 y1=27 x2=341 y2=50
# text: "Help"
# item 1: CUSTOM (0x80) disabled
# bounds: x1=282 y1=27 x2=341 y2=50
# data: ""
# item 2: BUTTON (0x04) enabled
# bounds: x1=70 y1=27 x2=274 y2=50
# text: "Define Factors and Levels"
# item 3: BUTTON (0x04) enabled
# bounds: x1=70 y1=68 x2=220 y2=91
# text: "2-level Design"
# item 4: BUTTON (0x04) enabled
# bounds: x1=70 y1=107 x2=220 y2=130
# text: "Response Surface"
# item 5: BUTTON (0x04) enabled
# bounds: x1=70 y1=147 x2=220 y2=170
# text: "Mixed-level Design"
# item 6: BUTTON (0x04) enabled
# bounds: x1=70 y1=186 x2=220 y2=209
# text: "Mixture Design"
# item 7: BUTTON (0x04) enabled
# bounds: x1=70 y1=226 x2=220 y2=249
# text: "General Factorial"
# item 8: BUTTON (0x04) enabled
# bounds: x1=69 y1=264 x2=219 y2=287
# text: "D-Optimal Design"
# item 9: ICON (0xA0) disabled
# bounds: x1=14 y1=24 x2=46 y2=56
# ICON resource ID: 265
# item 10: ICON (0xA0) disabled
# bounds: x1=14 y1=62 x2=46 y2=94
# ICON resource ID: 260
# item 11: ICON (0xA0) disabled
# bounds: x1=14 y1=105 x2=46 y2=137
# ICON resource ID: 261
# item 12: ICON (0xA0) disabled
# bounds: x1=14 y1=146 x2=46 y2=178
# ICON resource ID: 262
# item 13: ICON (0xA0) disabled
# bounds: x1=14 y1=182 x2=46 y2=214
# ICON resource ID: 263
# item 14: ICON (0xA0) disabled
# bounds: x1=15 y1=223 x2=47 y2=255
# ICON resource ID: 266
# item 15: ICON (0xA0) disabled
# bounds: x1=15 y1=258 x2=47 y2=290
# ICON resource ID: 264
# item 16: TEXT (0x88) disabled
# bounds: x1=235 y1=65 x2=395 y2=99
# text: "Screening for Factors\nthat may be important"
# item 17: TEXT (0x88) disabled
# bounds: x1=235 y1=105 x2=423 y2=139
# text: "Searching for the optimum, while allowing curvature"
# item 18: TEXT (0x88) disabled
# bounds: x1=235 y1=145 x2=393 y2=179
# text: "3-level and mixed\n2- and 3- level factors"
# item 19: TEXT (0x88) disabled
# bounds: x1=235 y1=185 x2=416 y2=218
# text: "When the factors are the ingredients in a mixture"
# item 20: TEXT (0x88) disabled
# bounds: x1=235 y1=224 x2=400 y2=256
# text: "How to make all combinations of levels"
# item 21: TEXT (0x88) disabled
# bounds: x1=235 y1=262 x2=436 y2=296
# text: "How to make a D-Optimal design from candidate points"
# item 22: TEXT (0x88) disabled
# bounds: x1=13 y1=3 x2=210 y2=22
# text: "Choose the Type of Design:"
# item 23: BUTTON (0x04) enabled
# bounds: x1=349 y1=27 x2=440 y2=50
# text: "Preferences"
DITL_1129_DOE_ Two-Level.txt
# 22 entries
# item 0: EDIT_TEXT (0x10) enabled
# bounds: x1=154 y1=30 x2=176 y2=45
# text: ""
# item 1: BUTTON (0x04) enabled
# bounds: x1=15 y1=56 x2=159 y2=75
# text: "Search for Designs"
# item 2: CUSTOM (0x00) enabled
# bounds: x1=11 y1=116 x2=492 y2=228
# data: ""
# item 3: BUTTON (0x04) enabled
# bounds: x1=298 y1=271 x2=475 y2=294
# text: "Generate Selected Design"
# item 4: BUTTON (0x04) enabled
# bounds: x1=421 y1=238 x2=475 y2=257
# text: "Help"
# item 5: CHECKBOX (0x05) enabled
# bounds: x1=193 y1=30 x2=275 y2=47
# text: "Blocking"
# item 6: TEXT (0x88) disabled
# bounds: x1=15 y1=30 x2=148 y2=49
# text: "Number of Factors:"
# item 7: TEXT (0x88) disabled
# bounds: x1=14 y1=4 x2=152 y2=23
# text: "Two-level Designs"
# item 8: TEXT (0x88) disabled
# bounds: x1=80 y1=83 x2=120 y2=115
# text: "Block Size"
# item 9: TEXT (0x88) disabled
# bounds: x1=265 y1=96 x2=341 y2=113
# text: "Resolution"
# item 10: TEXT (0x88) disabled
# bounds: x1=16 y1=82 x2=77 y2=113
# text: "Number of Runs"
# item 11: TEXT (0x88) disabled
# bounds: x1=127 y1=96 x2=171 y2=115
# text: "Type"
# item 12: TEXT (0x88) disabled
# bounds: x1=298 y1=3 x2=471 y2=54
# text: "Fractional Factorial and Plackett-Burman Designs\nfor Screening"
# item 13: TEXT (0x88) disabled
# bounds: x1=11 y1=238 x2=200 y2=255
# text: "Add Centerpoints Per Block:"
# item 14: EDIT_TEXT (0x10) enabled
# bounds: x1=211 y1=238 x2=235 y2=253
# text: "0"
# item 15: CUSTOM (0x80) disabled
# bounds: x1=15 y1=56 x2=159 y2=75
# data: ""
# item 16: CHECKBOX (0x05) enabled
# bounds: x1=298 y1=231 x2=416 y2=249
# text: "Random Order"
# item 17: CHECKBOX (0x05) enabled
# bounds: x1=298 y1=250 x2=413 y2=268
# text: "Make Model"
# item 18: EDIT_TEXT (0x10) enabled
# bounds: x1=211 y1=258 x2=235 y2=273
# text: "4"
# item 19: TEXT (0x88) disabled
# bounds: x1=11 y1=257 x2=208 y2=275
# text: "Minimum Aberration Degree:"
# item 20: TEXT (0x88) disabled
# bounds: x1=11 y1=276 x2=208 y2=294
# text: "Show Aliasing up to Order:"
# item 21: EDIT_TEXT (0x10) enabled
# bounds: x1=211 y1=278 x2=235 y2=293
# text: "2"
DITL_1130_DOE_ Mixed-Level.txt
# 16 entries
# item 0: EDIT_TEXT (0x10) enabled
# bounds: x1=207 y1=36 x2=238 y2=53
# text: ""
# item 1: EDIT_TEXT (0x10) enabled
# bounds: x1=207 y1=60 x2=238 y2=77
# text: ""
# item 2: BUTTON (0x04) enabled
# bounds: x1=49 y1=91 x2=193 y2=110
# text: "Search for Designs"
# item 3: CUSTOM (0x00) enabled
# bounds: x1=9 y1=155 x2=482 y2=237
# data: ""
# item 4: BUTTON (0x04) enabled
# bounds: x1=208 y1=249 x2=385 y2=272
# text: "Generate Selected Design"
# item 5: BUTTON (0x04) enabled
# bounds: x1=400 y1=250 x2=458 y2=270
# text: "Help"
# item 6: TEXT (0x88) disabled
# bounds: x1=19 y1=36 x2=197 y2=55
# text: "Number of 2-level Factors:"
# item 7: TEXT (0x88) disabled
# bounds: x1=16 y1=11 x2=243 y2=28
# text: "Mixed-Level and 3-Level Designs"
# item 8: TEXT (0x88) disabled
# bounds: x1=209 y1=137 x2=284 y2=153
# text: "Resolution"
# item 9: TEXT (0x88) disabled
# bounds: x1=14 y1=121 x2=69 y2=153
# text: "Number\nof Runs"
# item 10: TEXT (0x88) disabled
# bounds: x1=82 y1=136 x2=125 y2=153
# text: "Type"
# item 11: TEXT (0x88) disabled
# bounds: x1=19 y1=59 x2=197 y2=78
# text: "Number of 3-level Factors:"
# item 12: TEXT (0x88) disabled
# bounds: x1=315 y1=7 x2=444 y2=31
# text: "Orthogonal Arrays"
# item 13: CUSTOM (0x80) disabled
# bounds: x1=49 y1=91 x2=193 y2=110
# data: ""
# item 14: CHECKBOX (0x05) enabled
# bounds: x1=73 y1=262 x2=188 y2=280
# text: "Make Model"
# item 15: CHECKBOX (0x05) enabled
# bounds: x1=73 y1=242 x2=188 y2=260
# text: "Random Order"
DITL_1131_DOE_ Response Surface.txt
# 22 entries
# item 0: EDIT_TEXT (0x10) enabled
# bounds: x1=153 y1=36 x2=183 y2=52
# text: ""
# item 1: BUTTON (0x04) enabled
# bounds: x1=37 y1=65 x2=185 y2=85
# text: "Search for Designs"
# item 2: CUSTOM (0x00) enabled
# bounds: x1=7 y1=136 x2=456 y2=251
# data: ""
# item 3: BUTTON (0x04) enabled
# bounds: x1=191 y1=260 x2=368 y2=283
# text: "Generate Selected Design"
# item 4: BUTTON (0x04) enabled
# bounds: x1=387 y1=260 x2=445 y2=283
# text: "Help"
# item 5: RADIO_BUTTON (0x06) enabled
# bounds: x1=289 y1=41 x2=428 y2=59
# text: "Rotatable"
# item 6: RADIO_BUTTON (0x06) enabled
# bounds: x1=289 y1=59 x2=396 y2=77
# text: "Orthogonal"
# item 7: RADIO_BUTTON (0x06) enabled
# bounds: x1=289 y1=77 x2=365 y2=95
# text: "On Face"
# item 8: RADIO_BUTTON (0x06) enabled
# bounds: x1=289 y1=95 x2=373 y2=113
# text: "Specified:"
# item 9: CHECKBOX (0x05) enabled
# bounds: x1=289 y1=113 x2=365 y2=131
# text: "Inscribe"
# item 10: EDIT_TEXT (0x10) enabled
# bounds: x1=386 y1=96 x2=451 y2=112
# text: ""
# item 11: TEXT (0x88) disabled
# bounds: x1=16 y1=37 x2=149 y2=56
# text: "Number of Factors:"
# item 12: TEXT (0x88) disabled
# bounds: x1=16 y1=6 x2=200 y2=26
# text: "Response Surface Designs"
# item 13: TEXT (0x88) disabled
# bounds: x1=72 y1=94 x2=116 y2=127
# text: "Block\nSize"
# item 14: TEXT (0x88) disabled
# bounds: x1=121 y1=95 x2=218 y2=127
# text: "Number of\nCenter Points"
# item 15: TEXT (0x88) disabled
# bounds: x1=6 y1=96 x2=69 y2=127
# text: "Number\nof Runs"
# item 16: TEXT (0x88) disabled
# bounds: x1=221 y1=109 x2=264 y2=127
# text: "Type"
# item 17: TEXT (0x88) disabled
# bounds: x1=203 y1=6 x2=461 y2=24
# text: "Central Composite and Box-Behnken"
# item 18: TEXT (0x88) disabled
# bounds: x1=285 y1=25 x2=379 y2=41
# text: "Axial Scaling:"
# item 19: CUSTOM (0x80) disabled
# bounds: x1=37 y1=65 x2=185 y2=85
# data: ""
# item 20: CHECKBOX (0x05) enabled
# bounds: x1=36 y1=253 x2=157 y2=271
# text: "Random Order"
# item 21: CHECKBOX (0x05) enabled
# bounds: x1=36 y1=271 x2=157 y2=289
# text: "Make Model"
DITL_1134_DOE_ Specify Factors.txt
# 62 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=348 y1=255 x2=425 y2=275
# text: "OK"
# item 1: RESOURCE_CONTROL (0x07) enabled
# bounds: x1=451 y1=37 x2=467 y2=248
# CNTL resource ID: 128
# item 2: TEXT (0x88) disabled
# bounds: x1=6 y1=40 x2=30 y2=56
# text: "1"
# item 3: EDIT_TEXT (0x10) enabled
# bounds: x1=39 y1=40 x2=190 y2=56
# text: "X1"
# item 4: CUSTOM (0x80) disabled
# bounds: x1=355 y1=37 x2=445 y2=59
# data: ""
# item 5: EDIT_TEXT (0x10) enabled
# bounds: x1=195 y1=40 x2=270 y2=56
# text: "0"
# item 6: EDIT_TEXT (0x10) enabled
# bounds: x1=275 y1=40 x2=350 y2=56
# text: "1"
# item 7: TEXT (0x88) disabled
# bounds: x1=6 y1=61 x2=30 y2=77
# text: "2"
# item 8: EDIT_TEXT (0x10) enabled
# bounds: x1=39 y1=61 x2=190 y2=77
# text: "X2"
# item 9: CUSTOM (0x80) disabled
# bounds: x1=355 y1=58 x2=445 y2=80
# data: ""
# item 10: EDIT_TEXT (0x10) enabled
# bounds: x1=195 y1=61 x2=270 y2=77
# text: "0"
# item 11: EDIT_TEXT (0x10) enabled
# bounds: x1=275 y1=61 x2=350 y2=77
# text: "1"
# item 12: TEXT (0x88) disabled
# bounds: x1=6 y1=82 x2=30 y2=98
# text: "3"
# item 13: EDIT_TEXT (0x10) enabled
# bounds: x1=39 y1=82 x2=190 y2=98
# text: "X3"
# item 14: CUSTOM (0x80) disabled
# bounds: x1=355 y1=79 x2=445 y2=101
# data: ""
# item 15: EDIT_TEXT (0x10) enabled
# bounds: x1=195 y1=82 x2=270 y2=98
# text: "0"
# item 16: EDIT_TEXT (0x10) enabled
# bounds: x1=275 y1=82 x2=350 y2=98
# text: "1"
# item 17: TEXT (0x88) disabled
# bounds: x1=6 y1=103 x2=30 y2=119
# text: "4"
# item 18: EDIT_TEXT (0x10) enabled
# bounds: x1=39 y1=103 x2=190 y2=119
# text: "X4"
# item 19: CUSTOM (0x80) disabled
# bounds: x1=355 y1=100 x2=445 y2=122
# data: ""
# item 20: EDIT_TEXT (0x10) enabled
# bounds: x1=195 y1=103 x2=270 y2=119
# text: "0"
# item 21: EDIT_TEXT (0x10) enabled
# bounds: x1=275 y1=103 x2=350 y2=119
# text: "1"
# item 22: TEXT (0x88) disabled
# bounds: x1=6 y1=123 x2=30 y2=139
# text: "5"
# item 23: EDIT_TEXT (0x10) enabled
# bounds: x1=39 y1=124 x2=190 y2=140
# text: "X5"
# item 24: CUSTOM (0x80) disabled
# bounds: x1=355 y1=121 x2=445 y2=143
# data: ""
# item 25: EDIT_TEXT (0x10) enabled
# bounds: x1=195 y1=124 x2=270 y2=140
# text: "0"
# item 26: EDIT_TEXT (0x10) enabled
# bounds: x1=275 y1=124 x2=350 y2=140
# text: "1"
# item 27: TEXT (0x88) disabled
# bounds: x1=6 y1=145 x2=30 y2=161
# text: "6"
# item 28: EDIT_TEXT (0x10) enabled
# bounds: x1=39 y1=145 x2=190 y2=161
# text: "X6"
# item 29: CUSTOM (0x80) disabled
# bounds: x1=355 y1=142 x2=445 y2=164
# data: ""
# item 30: EDIT_TEXT (0x10) enabled
# bounds: x1=195 y1=145 x2=270 y2=161
# text: "0"
# item 31: EDIT_TEXT (0x10) enabled
# bounds: x1=275 y1=145 x2=350 y2=161
# text: "1"
# item 32: TEXT (0x88) disabled
# bounds: x1=6 y1=166 x2=30 y2=182
# text: "7"
# item 33: EDIT_TEXT (0x10) enabled
# bounds: x1=39 y1=166 x2=190 y2=182
# text: "X7"
# item 34: CUSTOM (0x80) disabled
# bounds: x1=355 y1=163 x2=445 y2=185
# data: ""
# item 35: EDIT_TEXT (0x10) enabled
# bounds: x1=195 y1=166 x2=270 y2=182
# text: "0"
# item 36: EDIT_TEXT (0x10) enabled
# bounds: x1=275 y1=166 x2=350 y2=182
# text: "1"
# item 37: TEXT (0x88) disabled
# bounds: x1=6 y1=186 x2=30 y2=202
# text: "8"
# item 38: EDIT_TEXT (0x10) enabled
# bounds: x1=39 y1=187 x2=190 y2=203
# text: "X8"
# item 39: CUSTOM (0x80) disabled
# bounds: x1=355 y1=184 x2=445 y2=206
# data: ""
# item 40: EDIT_TEXT (0x10) enabled
# bounds: x1=195 y1=187 x2=270 y2=203
# text: "0"
# item 41: EDIT_TEXT (0x10) enabled
# bounds: x1=275 y1=187 x2=350 y2=203
# text: "1"
# item 42: TEXT (0x88) disabled
# bounds: x1=6 y1=208 x2=30 y2=224
# text: "9"
# item 43: EDIT_TEXT (0x10) enabled
# bounds: x1=39 y1=208 x2=190 y2=224
# text: "X9"
# item 44: CUSTOM (0x80) disabled
# bounds: x1=355 y1=205 x2=445 y2=227
# data: ""
# item 45: EDIT_TEXT (0x10) enabled
# bounds: x1=195 y1=208 x2=270 y2=224
# text: "0"
# item 46: EDIT_TEXT (0x10) enabled
# bounds: x1=275 y1=208 x2=350 y2=224
# text: "1"
# item 47: TEXT (0x88) disabled
# bounds: x1=6 y1=230 x2=30 y2=246
# text: "10"
# item 48: EDIT_TEXT (0x10) enabled
# bounds: x1=39 y1=229 x2=190 y2=245
# text: "X10"
# item 49: CUSTOM (0x80) disabled
# bounds: x1=355 y1=226 x2=445 y2=247
# data: ""
# item 50: EDIT_TEXT (0x10) enabled
# bounds: x1=195 y1=229 x2=270 y2=245
# text: "0"
# item 51: EDIT_TEXT (0x10) enabled
# bounds: x1=275 y1=229 x2=350 y2=245
# text: "1"
# item 52: TEXT (0x88) disabled
# bounds: x1=40 y1=20 x2=141 y2=37
# text: "Factor Name"
# item 53: TEXT (0x88) disabled
# bounds: x1=188 y1=20 x2=273 y2=37
# text: "Lower Limit"
# item 54: TEXT (0x88) disabled
# bounds: x1=275 y1=20 x2=360 y2=37
# text: "Upper Limit"
# item 55: TEXT (0x08) enabled
# bounds: x1=368 y1=20 x2=407 y2=37
# text: "Type"
# item 56: BUTTON (0x04) enabled
# bounds: x1=213 y1=255 x2=318 y2=275
# text: "Default Limits"
# item 57: CHECKBOX (0x05) enabled
# bounds: x1=23 y1=277 x2=201 y2=298
# text: "Add Linear Constraints"
# item 58: CUSTOM (0x80) disabled
# bounds: x1=348 y1=255 x2=425 y2=275
# data: ""
# item 59: BUTTON (0x04) enabled
# bounds: x1=23 y1=255 x2=115 y2=275
# text: "X1,X2 Names"
# item 60: BUTTON (0x04) enabled
# bounds: x1=125 y1=255 x2=204 y2=275
# text: "A-Z Names"
# item 61: TEXT (0x88) disabled
# bounds: x1=146 y1=2 x2=323 y2=18
# text: "Define Factors and Levels:"
DITL_1135_DOE_ Mixture Design.txt
# 22 entries
# item 0: EDIT_TEXT (0x10) enabled
# bounds: x1=188 y1=22 x2=212 y2=40
# text: ""
# item 1: RADIO_BUTTON (0x06) enabled
# bounds: x1=12 y1=74 x2=144 y2=99
# text: "Simplex Centroid"
# item 2: RADIO_BUTTON (0x06) enabled
# bounds: x1=12 y1=134 x2=133 y2=159
# text: "Simplex Lattice"
# item 3: RADIO_BUTTON (0x06) enabled
# bounds: x1=12 y1=179 x2=147 y2=204
# text: "Extreme Vertices"
# item 4: EDIT_TEXT (0x10) enabled
# bounds: x1=383 y1=102 x2=406 y2=120
# text: ""
# item 5: EDIT_TEXT (0x10) enabled
# bounds: x1=383 y1=154 x2=406 y2=172
# text: ""
# item 6: EDIT_TEXT (0x10) enabled
# bounds: x1=383 y1=215 x2=406 y2=233
# text: ""
# item 7: BUTTON (0x04) enabled
# bounds: x1=183 y1=259 x2=321 y2=283
# text: "Generate"
# item 8: BUTTON (0x04) enabled
# bounds: x1=384 y1=8 x2=442 y2=28
# text: "Help"
# item 9: TEXT (0x08) enabled
# bounds: x1=9 y1=25 x2=177 y2=42
# text: "Enter Number of Factors:"
# item 10: TEXT (0x88) disabled
# bounds: x1=9 y1=5 x2=131 y2=22
# text: "Mixture Designs"
# item 11: TEXT (0x08) enabled
# bounds: x1=150 y1=79 x2=353 y2=129
# text: "Each factor by itself, then equal combinations of factors up to the degree specified"
# item 12: TEXT (0x88) disabled
# bounds: x1=361 y1=79 x2=449 y2=96
# text: "Degree <= nf"
# item 13: TEXT (0x08) enabled
# bounds: x1=150 y1=140 x2=339 y2=175
# text: "Triangular grid with the specified number of levels"
# item 14: TEXT (0x88) disabled
# bounds: x1=368 y1=131 x2=441 y2=147
# text: "Levels"
# item 15: TEXT (0x08) enabled
# bounds: x1=150 y1=184 x2=343 y2=252
# text: "Extreme corners of the space with specified constraints, then averages of corners up to the degree."
# item 16: TEXT (0x88) disabled
# bounds: x1=361 y1=188 x2=454 y2=206
# text: "Degree <= nf"
# item 17: TEXT (0x88) disabled
# bounds: x1=221 y1=24 x2=269 y2=41
# text: "nf <= 8"
# item 18: TEXT (0x88) disabled
# bounds: x1=8 y1=50 x2=269 y2=67
# text: "Choose one of three types of designs:"
# item 19: CUSTOM (0x80) disabled
# bounds: x1=183 y1=259 x2=321 y2=283
# data: ""
# item 20: CHECKBOX (0x05) enabled
# bounds: x1=14 y1=250 x2=135 y2=268
# text: "Random Order"
# item 21: CHECKBOX (0x05) enabled
# bounds: x1=14 y1=269 x2=129 y2=287
# text: "Make Model"
DITL_1136_DOE_ Specify Linear Constraints.txt
# 46 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=319 y1=191 x2=419 y2=211
# text: "Done"
# item 1: BUTTON (0x04) enabled
# bounds: x1=319 y1=214 x2=419 y2=234
# text: "Cancel"
# item 2: BUTTON (0x04) enabled
# bounds: x1=375 y1=165 x2=434 y2=186
# text: "Next >"
# item 3: BUTTON (0x04) enabled
# bounds: x1=308 y1=165 x2=367 y2=186
# text: "< Prev"
# item 4: TEXT (0x08) enabled
# bounds: x1=390 y1=141 x2=409 y2=157
# text: "1"
# item 5: RESOURCE_CONTROL (0x07) enabled
# bounds: x1=274 y1=23 x2=290 y2=234
# CNTL resource ID: 128
# item 6: RADIO_BUTTON (0x06) enabled
# bounds: x1=314 y1=93 x2=342 y2=113
# text: "‚â§"
# item 7: RADIO_BUTTON (0x06) enabled
# bounds: x1=314 y1=114 x2=342 y2=135
# text: "‚â•"
# item 8: EDIT_TEXT (0x10) enabled
# bounds: x1=376 y1=104 x2=434 y2=120
# text: "0"
# item 9: TEXT (0x88) disabled
# bounds: x1=6 y1=26 x2=30 y2=42
# text: "1"
# item 10: TEXT (0x08) enabled
# bounds: x1=39 y1=26 x2=190 y2=42
# text: "X1"
# item 11: EDIT_TEXT (0x10) enabled
# bounds: x1=195 y1=26 x2=270 y2=42
# text: "0"
# item 12: TEXT (0x88) disabled
# bounds: x1=6 y1=47 x2=30 y2=63
# text: "2"
# item 13: TEXT (0x08) enabled
# bounds: x1=39 y1=47 x2=190 y2=63
# text: "X2"
# item 14: EDIT_TEXT (0x10) enabled
# bounds: x1=195 y1=47 x2=270 y2=63
# text: "0"
# item 15: TEXT (0x88) disabled
# bounds: x1=6 y1=68 x2=30 y2=84
# text: "3"
# item 16: TEXT (0x08) enabled
# bounds: x1=39 y1=68 x2=190 y2=84
# text: "X3"
# item 17: EDIT_TEXT (0x10) enabled
# bounds: x1=195 y1=68 x2=270 y2=84
# text: "0"
# item 18: TEXT (0x88) disabled
# bounds: x1=6 y1=89 x2=30 y2=105
# text: "4"
# item 19: TEXT (0x08) enabled
# bounds: x1=39 y1=89 x2=190 y2=105
# text: "X4"
# item 20: EDIT_TEXT (0x10) enabled
# bounds: x1=195 y1=89 x2=270 y2=105
# text: "0"
# item 21: TEXT (0x88) disabled
# bounds: x1=6 y1=109 x2=30 y2=125
# text: "5"
# item 22: TEXT (0x08) enabled
# bounds: x1=39 y1=110 x2=190 y2=126
# text: "X5"
# item 23: EDIT_TEXT (0x10) enabled
# bounds: x1=195 y1=110 x2=270 y2=126
# text: "0"
# item 24: TEXT (0x88) disabled
# bounds: x1=6 y1=131 x2=30 y2=147
# text: "6"
# item 25: TEXT (0x08) enabled
# bounds: x1=39 y1=131 x2=190 y2=147
# text: "X6"
# item 26: EDIT_TEXT (0x10) enabled
# bounds: x1=195 y1=131 x2=270 y2=147
# text: "0"
# item 27: TEXT (0x88) disabled
# bounds: x1=6 y1=152 x2=30 y2=168
# text: "7"
# item 28: TEXT (0x08) enabled
# bounds: x1=39 y1=152 x2=190 y2=168
# text: "X7"
# item 29: EDIT_TEXT (0x10) enabled
# bounds: x1=195 y1=152 x2=270 y2=168
# text: "0"
# item 30: TEXT (0x88) disabled
# bounds: x1=6 y1=172 x2=30 y2=188
# text: "8"
# item 31: TEXT (0x08) enabled
# bounds: x1=39 y1=173 x2=190 y2=189
# text: "X8"
# item 32: EDIT_TEXT (0x10) enabled
# bounds: x1=195 y1=173 x2=270 y2=189
# text: "0"
# item 33: TEXT (0x88) disabled
# bounds: x1=6 y1=194 x2=30 y2=210
# text: "9"
# item 34: TEXT (0x08) enabled
# bounds: x1=39 y1=194 x2=190 y2=210
# text: "X9"
# item 35: EDIT_TEXT (0x10) enabled
# bounds: x1=195 y1=194 x2=270 y2=210
# text: "0"
# item 36: TEXT (0x88) disabled
# bounds: x1=6 y1=216 x2=30 y2=232
# text: "10"
# item 37: TEXT (0x08) enabled
# bounds: x1=39 y1=215 x2=190 y2=231
# text: "X10"
# item 38: EDIT_TEXT (0x10) enabled
# bounds: x1=195 y1=215 x2=270 y2=231
# text: "0"
# item 39: TEXT (0x88) disabled
# bounds: x1=36 y1=5 x2=137 y2=22
# text: "Factor Name"
# item 40: TEXT (0x88) disabled
# bounds: x1=190 y1=6 x2=275 y2=23
# text: "Coefficient"
# item 41: TEXT (0x88) disabled
# bounds: x1=311 y1=3 x2=439 y2=55
# text: "Specify a linear constraint across the factors."
# item 42: TEXT (0x88) disabled
# bounds: x1=374 y1=78 x2=440 y2=94
# text: "Constant"
# item 43: TEXT (0x88) disabled
# bounds: x1=298 y1=62 x2=372 y2=94
# text: "Inequality\nDirection"
# item 44: TEXT (0x88) disabled
# bounds: x1=313 y1=141 x2=388 y2=157
# text: "Constraint"
# item 45: CUSTOM (0x80) disabled
# bounds: x1=319 y1=191 x2=420 y2=211
# data: ""
DITL_1137_DOE_ General Factorial.txt
# 26 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=20 y1=174 x2=144 y2=198
# text: "Generate Table"
# item 1: BUTTON (0x04) enabled
# bounds: x1=179 y1=214 x2=238 y2=235
# text: "< Prev"
# item 2: BUTTON (0x04) enabled
# bounds: x1=242 y1=214 x2=301 y2=235
# text: "Next >"
# item 3: EDIT_TEXT (0x10) enabled
# bounds: x1=183 y1=51 x2=286 y2=67
# text: "X1"
# item 4: CUSTOM (0x00) enabled
# bounds: x1=179 y1=97 x2=273 y2=122
# data: ""
# item 5: CUSTOM (0x00) enabled
# bounds: x1=179 y1=146 x2=309 y2=171
# data: ""
# item 6: EDIT_TEXT (0x10) enabled
# bounds: x1=321 y1=32 x2=396 y2=48
# text: ""
# item 7: EDIT_TEXT (0x10) enabled
# bounds: x1=321 y1=53 x2=396 y2=69
# text: ""
# item 8: EDIT_TEXT (0x10) enabled
# bounds: x1=321 y1=74 x2=396 y2=90
# text: ""
# item 9: EDIT_TEXT (0x10) enabled
# bounds: x1=321 y1=95 x2=396 y2=111
# text: ""
# item 10: EDIT_TEXT (0x10) enabled
# bounds: x1=321 y1=116 x2=396 y2=132
# text: ""
# item 11: EDIT_TEXT (0x10) enabled
# bounds: x1=321 y1=137 x2=396 y2=153
# text: ""
# item 12: EDIT_TEXT (0x10) enabled
# bounds: x1=321 y1=158 x2=396 y2=174
# text: ""
# item 13: EDIT_TEXT (0x10) enabled
# bounds: x1=321 y1=179 x2=396 y2=195
# text: ""
# item 14: EDIT_TEXT (0x10) enabled
# bounds: x1=321 y1=200 x2=396 y2=216
# text: ""
# item 15: EDIT_TEXT (0x10) enabled
# bounds: x1=321 y1=221 x2=396 y2=237
# text: ""
# item 16: TEXT (0x88) disabled
# bounds: x1=179 y1=10 x2=273 y2=26
# text: "Factor"
# item 17: TEXT (0x88) disabled
# bounds: x1=325 y1=6 x2=378 y2=23
# text: "Levels"
# item 18: TEXT (0x08) enabled
# bounds: x1=182 y1=177 x2=301 y2=209
# text: "Scroll to next or previous factor:"
# item 19: TEXT (0x08) enabled
# bounds: x1=8 y1=9 x2=125 y2=26
# text: "General Factorial"
# item 20: TEXT (0x08) enabled
# bounds: x1=9 y1=33 x2=160 y2=165
# text: "To generate a table of all combinations of levels of several factors. Enter factor name and up to 10 levels, then use the Next button to go to the next factor."
# item 21: TEXT (0x88) disabled
# bounds: x1=180 y1=77 x2=274 y2=93
# text: "Data Type:"
# item 22: TEXT (0x88) disabled
# bounds: x1=180 y1=127 x2=296 y2=143
# text: "Factor Ordering:"
# item 23: BUTTON (0x04) enabled
# bounds: x1=85 y1=206 x2=144 y2=227
# text: "Help"
# item 24: BUTTON (0x04) enabled
# bounds: x1=20 y1=206 x2=79 y2=227
# text: "Clear"
# item 25: TEXT (0x08) enabled
# bounds: x1=179 y1=28 x2=254 y2=44
# text: "Name:"
DITL_1138_DOE_ Preferences.txt
# 8 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=230 y1=134 x2=288 y2=154
# text: "OK"
# item 1: BUTTON (0x04) enabled
# bounds: x1=141 y1=134 x2=199 y2=154
# text: "Cancel"
# item 2: CHECKBOX (0x05) enabled
# bounds: x1=14 y1=35 x2=261 y2=53
# text: "Show Cotter Designs in Screening"
# item 3: CHECKBOX (0x05) enabled
# bounds: x1=14 y1=59 x2=400 y2=89
# text: "Default is Minimum Aberration 3 Designs rather than 4"
# item 4: CHECKBOX (0x05) enabled
# bounds: x1=14 y1=97 x2=222 y2=115
# text: "Order FF Runs fast-to-slow"
# item 5: CUSTOM (0x80) disabled
# bounds: x1=230 y1=134 x2=288 y2=154
# data: ""
# item 6: TEXT (0x88) disabled
# bounds: x1=14 y1=5 x2=284 y2=21
# text: "Preferences for Design of Experiments"
# item 7: BUTTON (0x04) enabled
# bounds: x1=14 y1=134 x2=128 y2=154
# text: "Restore Default"
DITL_1200_TableInfo.txt
# 25 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=80 y1=220 x2=160 y2=250
# text: "OK"
# item 1: BUTTON (0x04) enabled
# bounds: x1=240 y1=220 x2=320 y2=250
# text: "Cancel"
# item 2: EDIT_TEXT (0x10) enabled
# bounds: x1=63 y1=102 x2=368 y2=201
# text: ""
# item 3: EDIT_TEXT (0x10) enabled
# bounds: x1=95 y1=10 x2=370 y2=28
# text: ""
# item 4: TEXT (0x88) disabled
# bounds: x1=125 y1=55 x2=175 y2=73
# text: "^0"
# item 5: TEXT (0x88) disabled
# bounds: x1=125 y1=78 x2=175 y2=96
# text: "^1"
# item 6: TEXT (0x88) disabled
# bounds: x1=10 y1=10 x2=90 y2=28
# text: "Data Table:"
# item 7: TEXT (0x88) disabled
# bounds: x1=10 y1=55 x2=125 y2=73
# text: "Number of Rows:"
# item 8: TEXT (0x88) disabled
# bounds: x1=10 y1=78 x2=125 y2=96
# text: "Number of Cols:"
# item 9: TEXT (0x88) disabled
# bounds: x1=10 y1=101 x2=60 y2=119
# text: "Notes:"
# item 10: CHECKBOX (0x05) enabled
# bounds: x1=95 y1=33 x2=151 y2=52
# text: "Lock"
# item 11: CUSTOM (0x80) disabled
# bounds: x1=85 y1=220 x2=145 y2=250
# data: ""
# item 12: TEXT (0x88) disabled
# bounds: x1=170 y1=120 x2=230 y2=140
# text: ""
# item 13: CHECKBOX (0x85) disabled
# bounds: x1=185 y1=33 x2=245 y2=51
# text: "Dirty"
# item 14: TEXT (0x88) disabled
# bounds: x1=10 y1=300 x2=120 y2=320
# text: "Summary Table:"
# item 15: TEXT (0x88) disabled
# bounds: x1=180 y1=304 x2=270 y2=324
# text: "# of By Cols:"
# item 16: TEXT (0x88) disabled
# bounds: x1=270 y1=304 x2=320 y2=324
# text: "^2"
# item 17: TEXT (0x88) disabled
# bounds: x1=10 y1=328 x2=115 y2=348
# text: "By Group Table:"
# item 18: TEXT (0x88) disabled
# bounds: x1=10 y1=351 x2=80 y2=371
# text: "By Group:"
# item 19: TEXT (0x88) disabled
# bounds: x1=151 y1=0 x2=166 y2=4
# text: ""
# item 20: TEXT (0x88) disabled
# bounds: x1=10 y1=375 x2=110 y2=395
# text: "Subset view:"
# item 21: TEXT (0x88) disabled
# bounds: x1=10 y1=400 x2=110 y2=420
# text: "Source Table:"
# item 22: TEXT (0x88) disabled
# bounds: x1=115 y1=400 x2=370 y2=420
# text: "%"
# item 23: TEXT (0x88) disabled
# bounds: x1=190 y1=425 x2=300 y2=443
# text: "# of Cols Added:"
# item 24: TEXT (0x88) disabled
# bounds: x1=300 y1=425 x2=360 y2=445
# text: "^1"
DITL_2015_ColInfo2.txt
# 32 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=410 y1=265 x2=480 y2=290
# text: "OK"
# item 1: BUTTON (0x04) enabled
# bounds: x1=325 y1=265 x2=395 y2=290
# text: "Cancel"
# item 2: BUTTON (0x04) enabled
# bounds: x1=155 y1=265 x2=225 y2=290
# text: "Next"
# item 3: CUSTOM (0x00) enabled
# bounds: x1=5 y1=265 x2=225 y2=290
# data: ""
# item 4: CUSTOM (0x80) disabled
# bounds: x1=410 y1=265 x2=480 y2=290
# data: ""
# item 5: CHECKBOX (0x05) enabled
# bounds: x1=335 y1=30 x2=400 y2=50
# text: "Lock"
# item 6: TEXT (0x88) disabled
# bounds: x1=90 y1=5 x2=482 y2=25
# text: "%0"
# item 7: EDIT_TEXT (0x90) disabled
# bounds: x1=90 y1=30 x2=325 y2=50
# text: ""
# item 8: EDIT_TEXT (0x90) disabled
# bounds: x1=90 y1=130 x2=130 y2=150
# text: ""
# item 9: EDIT_TEXT (0x90) disabled
# bounds: x1=320 y1=130 x2=350 y2=150
# text: "2"
# item 10: EDIT_TEXT (0x90) disabled
# bounds: x1=90 y1=160 x2=482 y2=250
# text: ""
# item 11: CUSTOM (0x00) enabled
# bounds: x1=90 y1=80 x2=190 y2=100
# data: ""
# item 12: CUSTOM (0x00) enabled
# bounds: x1=342 y1=80 x2=482 y2=100
# data: ""
# item 13: CUSTOM (0x00) enabled
# bounds: x1=112 y1=104 x2=242 y2=124
# data: ""
# item 14: CUSTOM (0x00) enabled
# bounds: x1=195 y1=130 x2=317 y2=150
# data: ""
# item 15: CUSTOM (0x00) enabled
# bounds: x1=320 y1=130 x2=482 y2=150
# data: ""
# item 16: RADIO_BUTTON (0x06) enabled
# bounds: x1=90 y1=55 x2=160 y2=75
# text: "None"
# item 17: RADIO_BUTTON (0x06) enabled
# bounds: x1=175 y1=55 x2=265 y2=75
# text: "List Check"
# item 18: RADIO_BUTTON (0x06) enabled
# bounds: x1=275 y1=55 x2=390 y2=75
# text: "Range Check"
# item 19: TEXT (0x88) disabled
# bounds: x1=5 y1=5 x2=89 y2=25
# text: "Table Name:"
# item 20: TEXT (0x88) disabled
# bounds: x1=5 y1=30 x2=85 y2=50
# text: "Col Name:"
# item 21: TEXT (0x88) disabled
# bounds: x1=5 y1=130 x2=85 y2=150
# text: "Field Width:"
# item 22: TEXT (0x88) disabled
# bounds: x1=5 y1=160 x2=85 y2=180
# text: "Notes:"
# item 23: TEXT (0x88) disabled
# bounds: x1=5 y1=80 x2=85 y2=100
# text: "Data Type:"
# item 24: TEXT (0x88) disabled
# bounds: x1=5 y1=105 x2=108 y2=125
# text: "Modeling Type:"
# item 25: TEXT (0x88) disabled
# bounds: x1=140 y1=130 x2=195 y2=150
# text: "Format:"
# item 26: TEXT (0x88) disabled
# bounds: x1=246 y1=80 x2=336 y2=100
# text: "Data Source:"
# item 27: TEXT (0x88) disabled
# bounds: x1=5 y1=55 x2=85 y2=75
# text: "Validation:"
# item 28: BUTTON (0x04) enabled
# bounds: x1=240 y1=265 x2=310 y2=290
# text: "Help"
# item 29: TEXT (0x88) disabled
# bounds: x1=200 y1=0 x2=215 y2=4
# text: ""
# item 30: TEXT (0x88) disabled
# bounds: x1=90 y1=55 x2=480 y2=80
# text: "data from the table “%0”"
# item 31: CUSTOM (0x00) enabled
# bounds: x1=5 y1=265 x2=225 y2=290
# data: ""
DITL_2094_MismatchedType.txt
# 2 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=89 y1=124 x2=149 y2=144
# text: "OK"
# item 1: TEXT (0x88) disabled
# bounds: x1=79 y1=8 x2=328 y2=106
# text: "Some columns with the same names have different data types.\n\nMismatched data from subsequent tables will be replaced with missing values."
DITL_2511_getInt.txt
# 5 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=180 y1=100 x2=250 y2=125
# text: "OK"
# item 1: BUTTON (0x04) enabled
# bounds: x1=50 y1=100 x2=120 y2=125
# text: "Cancel"
# item 2: CUSTOM (0x00) enabled
# bounds: x1=180 y1=100 x2=250 y2=125
# data: ""
# item 3: TEXT (0x88) disabled
# bounds: x1=10 y1=10 x2=300 y2=50
# text: "^0"
# item 4: EDIT_TEXT (0x10) enabled
# bounds: x1=50 y1=60 x2=120 y2=80
# text: ""
DITL_2571_GetText.txt
# 13 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=55 y1=175 x2=125 y2=200
# text: "OK"
# item 1: BUTTON (0x04) enabled
# bounds: x1=195 y1=175 x2=265 y2=200
# text: "Cancel"
# item 2: RADIO_BUTTON (0x06) enabled
# bounds: x1=105 y1=110 x2=170 y2=130
# text: "Center"
# item 3: RADIO_BUTTON (0x06) enabled
# bounds: x1=175 y1=110 x2=235 y2=130
# text: "Left"
# item 4: RADIO_BUTTON (0x06) enabled
# bounds: x1=250 y1=110 x2=310 y2=130
# text: "Right"
# item 5: RADIO_BUTTON (0x06) enabled
# bounds: x1=105 y1=135 x2=165 y2=155
# text: "Text"
# item 6: RADIO_BUTTON (0x06) enabled
# bounds: x1=175 y1=135 x2=250 y2=156
# text: "Heading"
# item 7: RADIO_BUTTON (0x06) enabled
# bounds: x1=250 y1=135 x2=310 y2=155
# text: "Title"
# item 8: EDIT_TEXT (0x90) disabled
# bounds: x1=10 y1=32 x2=310 y2=100
# text: ""
# item 9: TEXT (0x88) disabled
# bounds: x1=10 y1=10 x2=100 y2=28
# text: "^0"
# item 10: TEXT (0x08) enabled
# bounds: x1=10 y1=110 x2=100 y2=130
# text: "Justification"
# item 11: TEXT (0x88) disabled
# bounds: x1=10 y1=135 x2=100 y2=155
# text: "Font Type"
# item 12: CUSTOM (0x80) disabled
# bounds: x1=61 y1=178 x2=121 y2=198
# data: ""
DITL_2943_SetRole1.txt
# 19 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=90 y1=222 x2=150 y2=247
# text: "Done"
# item 1: BUTTON (0x04) enabled
# bounds: x1=20 y1=222 x2=80 y2=247
# text: "Cancel"
# item 2: BUTTON (0x04) enabled
# bounds: x1=20 y1=257 x2=80 y2=282
# text: "Help"
# item 3: CUSTOM (0x00) enabled
# bounds: x1=90 y1=222 x2=150 y2=247
# data: ""
# item 4: TEXT (0x88) disabled
# bounds: x1=10 y1=17 x2=400 y2=52
# text: "Set Role"
# item 5: TEXT (0x88) disabled
# bounds: x1=10 y1=57 x2=400 y2=77
# text: "Columns from %0"
# item 6: CUSTOM (0x00) enabled
# bounds: x1=10 y1=77 x2=165 y2=212
# data: ""
# item 7: CUSTOM (0x00) enabled
# bounds: x1=255 y1=77 x2=400 y2=162
# data: ""
# item 8: CUSTOM (0x00) enabled
# bounds: x1=255 y1=172 x2=400 y2=192
# data: ""
# item 9: CUSTOM (0x00) enabled
# bounds: x1=255 y1=202 x2=400 y2=222
# data: ""
# item 10: CUSTOM (0x00) enabled
# bounds: x1=255 y1=232 x2=400 y2=252
# data: ""
# item 11: BUTTON (0x04) enabled
# bounds: x1=175 y1=142 x2=245 y2=162
# text: "Remove"
# item 12: BUTTON (0x04) enabled
# bounds: x1=175 y1=107 x2=245 y2=127
# text: "» Add »"
# item 13: BUTTON (0x04) enabled
# bounds: x1=175 y1=172 x2=245 y2=192
# text: "» Wt »"
# item 14: BUTTON (0x04) enabled
# bounds: x1=175 y1=202 x2=245 y2=222
# text: "» Freq »"
# item 15: BUTTON (0x04) enabled
# bounds: x1=175 y1=232 x2=245 y2=252
# text: "» Lbl »"
# item 16: TEXT (0x88) disabled
# bounds: x1=490 y1=263 x2=505 y2=266
# text: "This is nothing but a placeholder so that item #19 could be created."
# item 17: TEXT (0x88) disabled
# bounds: x1=500 y1=263 x2=515 y2=266
# text: "This is nothing but a placeholder so that item #19 could be created."
# item 18: TEXT (0x88) disabled
# bounds: x1=10 y1=1 x2=400 y2=17
# text: "Analysis Title"
DITL_2944_SetRole2.txt
# 19 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=90 y1=232 x2=150 y2=257
# text: "Done"
# item 1: BUTTON (0x04) enabled
# bounds: x1=20 y1=232 x2=80 y2=257
# text: "Cancel"
# item 2: BUTTON (0x04) enabled
# bounds: x1=20 y1=267 x2=80 y2=292
# text: "Help"
# item 3: CUSTOM (0x00) enabled
# bounds: x1=90 y1=232 x2=150 y2=257
# data: ""
# item 4: TEXT (0x88) disabled
# bounds: x1=10 y1=17 x2=436 y2=52
# text: "Set Role"
# item 5: TEXT (0x88) disabled
# bounds: x1=10 y1=62 x2=400 y2=82
# text: "Columns from %0"
# item 6: CUSTOM (0x00) enabled
# bounds: x1=10 y1=82 x2=170 y2=222
# data: ""
# item 7: CUSTOM (0x00) enabled
# bounds: x1=287 y1=82 x2=437 y2=152
# data: ""
# item 8: CUSTOM (0x00) enabled
# bounds: x1=287 y1=152 x2=437 y2=222
# data: ""
# item 9: CUSTOM (0x00) enabled
# bounds: x1=287 y1=222 x2=437 y2=242
# data: ""
# item 10: CUSTOM (0x00) enabled
# bounds: x1=287 y1=247 x2=437 y2=267
# data: ""
# item 11: CUSTOM (0x00) enabled
# bounds: x1=287 y1=272 x2=437 y2=292
# data: ""
# item 12: BUTTON (0x04) enabled
# bounds: x1=190 y1=142 x2=267 y2=162
# text: "Remove"
# item 13: BUTTON (0x04) enabled
# bounds: x1=190 y1=107 x2=267 y2=127
# text: "» X »"
# item 14: BUTTON (0x04) enabled
# bounds: x1=190 y1=177 x2=267 y2=197
# text: "» Y »"
# item 15: BUTTON (0x04) enabled
# bounds: x1=190 y1=222 x2=267 y2=242
# text: "» Weight »"
# item 16: BUTTON (0x04) enabled
# bounds: x1=190 y1=247 x2=267 y2=267
# text: "» Freq »"
# item 17: BUTTON (0x04) enabled
# bounds: x1=190 y1=272 x2=267 y2=292
# text: "» Label »"
# item 18: TEXT (0x88) disabled
# bounds: x1=10 y1=1 x2=436 y2=17
# text: "Analysis Title"
DITL_2945_Rows_ Select Where.txt
# 11 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=427 y1=144 x2=487 y2=169
# text: "OK"
# item 1: BUTTON (0x04) enabled
# bounds: x1=348 y1=144 x2=408 y2=169
# text: "Cancel"
# item 2: TEXT (0x88) disabled
# bounds: x1=7 y1=2 x2=500 y2=18
# text: "Select Rows from ^0 where..."
# item 3: CUSTOM (0x00) enabled
# bounds: x1=6 y1=44 x2=157 y2=179
# data: ""
# item 4: CUSTOM (0x00) enabled
# bounds: x1=180 y1=47 x2=393 y2=70
# data: ""
# item 5: EDIT_TEXT (0x10) enabled
# bounds: x1=400 y1=49 x2=493 y2=68
# text: ""
# item 6: CHECKBOX (0x05) enabled
# bounds: x1=180 y1=79 x2=309 y2=98
# text: "Match case"
# item 7: CHECKBOX (0x05) enabled
# bounds: x1=180 y1=108 x2=390 y2=126
# text: "Search selected rows only"
# item 8: CUSTOM (0x80) disabled
# bounds: x1=427 y1=144 x2=488 y2=169
# data: ""
# item 9: BUTTON (0x04) enabled
# bounds: x1=270 y1=144 x2=330 y2=169
# text: "Help"
# item 10: TEXT (0x88) disabled
# bounds: x1=6 y1=24 x2=100 y2=44
# text: "Column"
DITL_2946_Edit_ Find.txt
# 16 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=364 y1=12 x2=426 y2=37
# text: "Find"
# item 1: BUTTON (0x04) enabled
# bounds: x1=364 y1=153 x2=424 y2=178
# text: "Cancel"
# item 2: BUTTON (0x04) enabled
# bounds: x1=240 y1=104 x2=324 y2=129
# text: "Don\'t Find"
# item 3: BUTTON (0x04) enabled
# bounds: x1=364 y1=54 x2=426 y2=79
# text: " Replace "
# item 4: BUTTON (0x04) enabled
# bounds: x1=340 y1=104 x2=424 y2=129
# text: "Replace All"
# item 5: BUTTON (0x04) enabled
# bounds: x1=264 y1=153 x2=324 y2=178
# text: "Help"
# item 6: EDIT_TEXT (0x10) enabled
# bounds: x1=114 y1=14 x2=340 y2=34
# text: ""
# item 7: EDIT_TEXT (0x10) enabled
# bounds: x1=114 y1=55 x2=340 y2=75
# text: ""
# item 8: CHECKBOX (0x05) enabled
# bounds: x1=9 y1=86 x2=128 y2=105
# text: "Match case"
# item 9: CHECKBOX (0x05) enabled
# bounds: x1=9 y1=110 x2=214 y2=129
# text: "Match whole words only"
# item 10: TEXT (0x88) disabled
# bounds: x1=9 y1=17 x2=89 y2=33
# text: "Find what:"
# item 11: TEXT (0x88) disabled
# bounds: x1=9 y1=56 x2=104 y2=74
# text: "Replace with:"
# item 12: CUSTOM (0x80) disabled
# bounds: x1=364 y1=12 x2=427 y2=37
# data: ""
# item 13: RADIO_BUTTON (0x06) enabled
# bounds: x1=9 y1=134 x2=155 y2=154
# text: "Search by row"
# item 14: RADIO_BUTTON (0x06) enabled
# bounds: x1=9 y1=158 x2=155 y2=178
# text: "Search by column"
# item 15: TEXT (0x88) disabled
# bounds: x1=152 y1=1 x2=170 y2=6
# text: ""
DITL_3001_Stack.txt
# 19 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=140 y1=220 x2=210 y2=245
# text: "Done"
# item 1: BUTTON (0x04) enabled
# bounds: x1=20 y1=220 x2=100 y2=245
# text: "Cancel"
# item 2: BUTTON (0x04) enabled
# bounds: x1=177 y1=120 x2=242 y2=140
# text: "Help"
# item 3: CUSTOM (0x80) disabled
# bounds: x1=140 y1=220 x2=210 y2=245
# data: ""
# item 4: CUSTOM (0x00) enabled
# bounds: x1=10 y1=30 x2=160 y2=160
# data: ""
# item 5: CUSTOM (0x00) enabled
# bounds: x1=261 y1=30 x2=411 y2=150
# data: ""
# item 6: BUTTON (0x84) disabled
# bounds: x1=177 y1=90 x2=242 y2=110
# text: "Remove"
# item 7: BUTTON (0x04) enabled
# bounds: x1=177 y1=60 x2=242 y2=80
# text: "» Stack »"
# item 8: EDIT_TEXT (0x10) enabled
# bounds: x1=261 y1=180 x2=411 y2=198
# text: "_Stacked_"
# item 9: EDIT_TEXT (0x10) enabled
# bounds: x1=261 y1=227 x2=411 y2=245
# text: "_ID_"
# item 10: EDIT_TEXT (0x10) enabled
# bounds: x1=10 y1=187 x2=200 y2=205
# text: "Untitled"
# item 11: TEXT (0x08) enabled
# bounds: x1=10 y1=10 x2=220 y2=28
# text: "Columns from %0"
# item 12: TEXT (0x08) enabled
# bounds: x1=261 y1=10 x2=411 y2=28
# text: "Columns to Stack"
# item 13: TEXT (0x88) disabled
# bounds: x1=261 y1=157 x2=411 y2=175
# text: "Name of Stacked Cols :"
# item 14: TEXT (0x88) disabled
# bounds: x1=261 y1=205 x2=411 y2=223
# text: "Name of ID Column :"
# item 15: TEXT (0x88) disabled
# bounds: x1=10 y1=165 x2=130 y2=183
# text: "Output table:"
# item 16: TEXT (0x88) disabled
# bounds: x1=230 y1=0 x2=241 y2=5
# text: ""
# item 17: UNKNOWN (0x01) enabled
# bounds: x1=0 y1=0 x2=0 y2=0
# data: 00010BB9
# item 18: UNKNOWN (0x01) enabled
# bounds: x1=0 y1=0 x2=0 y2=0
# data: 00020BB9
DITL_3002_Sort.txt
# 17 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=160 y1=223 x2=230 y2=248
# text: "Sort"
# item 1: BUTTON (0x04) enabled
# bounds: x1=50 y1=223 x2=120 y2=248
# text: "Cancel"
# item 2: BUTTON (0x04) enabled
# bounds: x1=270 y1=223 x2=340 y2=248
# text: "Help"
# item 3: CUSTOM (0x00) enabled
# bounds: x1=162 y1=222 x2=232 y2=247
# data: ""
# item 4: CUSTOM (0x00) enabled
# bounds: x1=10 y1=33 x2=160 y2=158
# data: ""
# item 5: CUSTOM (0x00) enabled
# bounds: x1=240 y1=33 x2=390 y2=158
# data: ""
# item 6: BUTTON (0x04) enabled
# bounds: x1=170 y1=118 x2=235 y2=138
# text: "Remove"
# item 7: BUTTON (0x04) enabled
# bounds: x1=170 y1=68 x2=235 y2=88
# text: "» Add »"
# item 8: BUTTON (0x04) enabled
# bounds: x1=270 y1=163 x2=370 y2=183
# text: "a…Z/ Z…a"
# item 9: CHECKBOX (0x05) enabled
# bounds: x1=10 y1=163 x2=180 y2=183
# text: "Replace Original Table"
# item 10: EDIT_TEXT (0x10) enabled
# bounds: x1=150 y1=188 x2=390 y2=206
# text: "Untitled"
# item 11: TEXT (0x88) disabled
# bounds: x1=10 y1=188 x2=145 y2=206
# text: "Output Table Name:"
# item 12: TEXT (0x08) enabled
# bounds: x1=10 y1=8 x2=277 y2=28
# text: "Columns from %0"
# item 13: TEXT (0x08) enabled
# bounds: x1=285 y1=8 x2=355 y2=28
# text: "Sort By:"
# item 14: TEXT (0x88) disabled
# bounds: x1=198 y1=1 x2=227 y2=5
# text: ""
# item 15: UNKNOWN (0x01) enabled
# bounds: x1=0 y1=0 x2=0 y2=0
# data: 00010BBA
# item 16: UNKNOWN (0x01) enabled
# bounds: x1=0 y1=0 x2=0 y2=0
# data: 00020BBA
DITL_3010_Join.txt
# 19 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=200 y1=55 x2=280 y2=75
# text: "Join"
# item 1: BUTTON (0x04) enabled
# bounds: x1=200 y1=85 x2=280 y2=105
# text: "Cancel"
# item 2: BUTTON (0x04) enabled
# bounds: x1=200 y1=115 x2=280 y2=135
# text: "Help"
# item 3: CUSTOM (0x80) disabled
# bounds: x1=207 y1=56 x2=287 y2=76
# data: ""
# item 4: CUSTOM (0x00) enabled
# bounds: x1=10 y1=50 x2=180 y2=145
# data: ""
# item 5: EDIT_TEXT (0x10) enabled
# bounds: x1=25 y1=172 x2=290 y2=190
# text: "Untitled"
# item 6: RADIO_BUTTON (0x06) enabled
# bounds: x1=40 y1=213 x2=165 y2=231
# text: "By Row Number"
# item 7: RADIO_BUTTON (0x06) enabled
# bounds: x1=190 y1=213 x2=280 y2=231
# text: "Cartesian"
# item 8: RADIO_BUTTON (0x06) enabled
# bounds: x1=40 y1=231 x2=185 y2=249
# text: "by Matching Cols..."
# item 9: CHECKBOX (0x05) enabled
# bounds: x1=10 y1=250 x2=140 y2=268
# text: "Select Columns…"
# item 10: TEXT (0x88) disabled
# bounds: x1=50 y1=10 x2=290 y2=28
# text: "%0"
# item 11: TEXT (0x88) disabled
# bounds: x1=50 y1=30 x2=290 y2=48
# text: ""
# item 12: TEXT (0x88) disabled
# bounds: x1=10 y1=10 x2=45 y2=28
# text: "Join "
# item 13: TEXT (0x88) disabled
# bounds: x1=10 y1=30 x2=45 y2=48
# text: "With"
# item 14: TEXT (0x88) disabled
# bounds: x1=10 y1=150 x2=140 y2=168
# text: "Output Table Name:"
# item 15: TEXT (0x08) enabled
# bounds: x1=10 y1=195 x2=185 y2=213
# text: "Matching Specification:"
# item 16: TEXT (0x88) disabled
# bounds: x1=124 y1=0 x2=139 y2=4
# text: ""
# item 17: UNKNOWN (0x01) enabled
# bounds: x1=0 y1=0 x2=0 y2=0
# data: 00010BC2
# item 18: UNKNOWN (0x01) enabled
# bounds: x1=0 y1=0 x2=0 y2=0
# data: 00020BC2
DITL_3011_JoinMatch.txt
# 17 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=265 y1=250 x2=345 y2=275
# text: "Done"
# item 1: BUTTON (0x04) enabled
# bounds: x1=155 y1=250 x2=235 y2=275
# text: "Cancel"
# item 2: BUTTON (0x04) enabled
# bounds: x1=45 y1=250 x2=125 y2=275
# text: "Help"
# item 3: CUSTOM (0x80) disabled
# bounds: x1=265 y1=250 x2=345 y2=275
# data: ""
# item 4: CUSTOM (0x00) enabled
# bounds: x1=10 y1=30 x2=160 y2=120
# data: ""
# item 5: CUSTOM (0x00) enabled
# bounds: x1=244 y1=30 x2=394 y2=120
# data: ""
# item 6: CUSTOM (0x00) enabled
# bounds: x1=10 y1=125 x2=160 y2=195
# data: ""
# item 7: CUSTOM (0x00) enabled
# bounds: x1=244 y1=125 x2=394 y2=195
# data: ""
# item 8: BUTTON (0x04) enabled
# bounds: x1=171 y1=150 x2=231 y2=170
# text: "Remove"
# item 9: BUTTON (0x04) enabled
# bounds: x1=171 y1=65 x2=231 y2=85
# text: "Match"
# item 10: CHECKBOX (0x05) enabled
# bounds: x1=10 y1=200 x2=130 y2=218
# text: "Drop Multiples"
# item 11: CHECKBOX (0x05) enabled
# bounds: x1=230 y1=200 x2=350 y2=218
# text: "Drop Multiples"
# item 12: CHECKBOX (0x05) enabled
# bounds: x1=10 y1=220 x2=170 y2=238
# text: "Include Non-matches"
# item 13: CHECKBOX (0x05) enabled
# bounds: x1=230 y1=220 x2=390 y2=238
# text: "Include Non-matches"
# item 14: TEXT (0x88) disabled
# bounds: x1=10 y1=10 x2=160 y2=28
# text: "Table 1"
# item 15: TEXT (0x08) enabled
# bounds: x1=244 y1=10 x2=394 y2=28
# text: "Table 2"
# item 16: TEXT (0x88) disabled
# bounds: x1=195 y1=0 x2=210 y2=4
# text: ""
DITL_3012_JoinSelect.txt
# 13 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=350 y1=175 x2=420 y2=200
# text: "Done"
# item 1: BUTTON (0x04) enabled
# bounds: x1=265 y1=175 x2=335 y2=200
# text: "Cancel"
# item 2: BUTTON (0x04) enabled
# bounds: x1=180 y1=175 x2=250 y2=200
# text: "Help"
# item 3: CUSTOM (0x80) disabled
# bounds: x1=350 y1=175 x2=420 y2=200
# data: ""
# item 4: CUSTOM (0x00) enabled
# bounds: x1=10 y1=30 x2=160 y2=130
# data: ""
# item 5: CUSTOM (0x00) enabled
# bounds: x1=10 y1=152 x2=160 y2=252
# data: ""
# item 6: CUSTOM (0x00) enabled
# bounds: x1=265 y1=30 x2=420 y2=160
# data: ""
# item 7: BUTTON (0x04) enabled
# bounds: x1=175 y1=90 x2=250 y2=110
# text: "Remove"
# item 8: BUTTON (0x04) enabled
# bounds: x1=175 y1=50 x2=250 y2=70
# text: "» Select »"
# item 9: TEXT (0x88) disabled
# bounds: x1=10 y1=10 x2=160 y2=28
# text: "Table 1"
# item 10: TEXT (0x08) enabled
# bounds: x1=265 y1=10 x2=420 y2=28
# text: "^2"
# item 11: TEXT (0x08) enabled
# bounds: x1=10 y1=132 x2=160 y2=150
# text: "Table 2"
# item 12: TEXT (0x88) disabled
# bounds: x1=206 y1=0 x2=221 y2=4
# text: ""
DITL_3999_SaveAs.txt
# 21 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=220 y1=130 x2=290 y2=150
# text: "Save"
# item 1: BUTTON (0x04) enabled
# bounds: x1=220 y1=155 x2=290 y2=175
# text: "Cancel"
# item 2: TEXT (0x88) disabled
# bounds: x1=10 y1=127 x2=90 y2=145
# text: "Save as:"
# item 3: CUSTOM (0x80) disabled
# bounds: x1=200 y1=30 x2=300 y2=50
# data: ""
# item 4: BUTTON (0x04) enabled
# bounds: x1=220 y1=55 x2=290 y2=75
# text: "Eject"
# item 5: BUTTON (0x04) enabled
# bounds: x1=220 y1=80 x2=290 y2=100
# text: "Drive"
# item 6: EDIT_TEXT (0x10) enabled
# bounds: x1=10 y1=150 x2=190 y2=168
# text: ""
# item 7: CUSTOM (0x80) disabled
# bounds: x1=10 y1=30 x2=200 y2=125
# data: ""
# item 8: RADIO_BUTTON (0x06) enabled
# bounds: x1=10 y1=175 x2=140 y2=195
# text: "JMP Format"
# item 9: RADIO_BUTTON (0x06) enabled
# bounds: x1=12 y1=220 x2=172 y2=240
# text: "SAS Transport Format"
# item 10: RADIO_BUTTON (0x06) enabled
# bounds: x1=12 y1=244 x2=112 y2=264
# text: "Text Format"
# item 11: RADIO_BUTTON (0x06) enabled
# bounds: x1=16419 y1=255 x2=16509 y2=275
# text: "Data Only"
# item 12: RADIO_BUTTON (0x06) enabled
# bounds: x1=16514 y1=255 x2=16579 y2=275
# text: "Labels"
# item 13: RADIO_BUTTON (0x06) enabled
# bounds: x1=16584 y1=255 x2=16679 y2=275
# text: "JMP Header"
# item 14: BUTTON (0x04) enabled
# bounds: x1=202 y1=220 x2=292 y2=240
# text: "Append To…"
# item 15: TEXT (0x88) disabled
# bounds: x1=325 y1=200 x2=385 y2=220
# text: "Export"
# item 16: TEXT (0x88) disabled
# bounds: x1=324 y1=227 x2=384 y2=247
# text: "Save"
# item 17: BUTTON (0x04) enabled
# bounds: x1=105 y1=279 x2=175 y2=299
# text: "Help"
# item 18: CUSTOM (0x80) disabled
# bounds: x1=220 y1=130 x2=290 y2=150
# data: ""
# item 19: CHECKBOX (0x05) enabled
# bounds: x1=30 y1=195 x2=290 y2=215
# text: "Pre-version 3 compatible format"
# item 20: BUTTON (0x84) disabled
# bounds: x1=130 y1=245 x2=222 y2=265
# text: "Text Options"
DITL_4000_Import.txt
# 36 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=256 y1=133 x2=336 y2=151
# text: "Open"
# item 1: BUTTON (0x04) enabled
# bounds: x1=699 y1=0 x2=717 y2=80
# text: "Hidden"
# item 2: BUTTON (0x04) enabled
# bounds: x1=256 y1=158 x2=336 y2=176
# text: "Cancel"
# item 3: CUSTOM (0x80) disabled
# bounds: x1=232 y1=35 x2=345 y2=55
# data: ""
# item 4: BUTTON (0x04) enabled
# bounds: x1=256 y1=63 x2=336 y2=81
# text: "Eject"
# item 5: BUTTON (0x04) enabled
# bounds: x1=256 y1=88 x2=336 y2=106
# text: "Drive"
# item 6: CUSTOM (0x00) enabled
# bounds: x1=10 y1=35 x2=230 y2=180
# data: ""
# item 7: CUSTOM (0x00) enabled
# bounds: x1=230 y1=35 x2=245 y2=180
# data: ""
# item 8: CUSTOM (0x80) disabled
# bounds: x1=252 y1=119 x2=340 y2=120
# data: ""
# item 9: TEXT (0x88) disabled
# bounds: x1=660 y1=0 x2=756 y2=101
# text: ""
# item 10: RADIO_BUTTON (0x06) enabled
# bounds: x1=10 y1=188 x2=93 y2=206
# text: "Data Only"
# item 11: RADIO_BUTTON (0x06) enabled
# bounds: x1=95 y1=188 x2=160 y2=206
# text: "Labels"
# item 12: RADIO_BUTTON (0x06) enabled
# bounds: x1=163 y1=188 x2=260 y2=206
# text: "JMP Header"
# item 13: RADIO_BUTTON (0x06) enabled
# bounds: x1=263 y1=188 x2=370 y2=206
# text: "SAS Transport"
# item 14: CHECKBOX (0x05) enabled
# bounds: x1=100 y1=208 x2=145 y2=226
# text: "Tab"
# item 15: CHECKBOX (0x05) enabled
# bounds: x1=194 y1=208 x2=259 y2=226
# text: "space"
# item 16: CHECKBOX (0x05) enabled
# bounds: x1=269 y1=208 x2=344 y2=226
# text: "spaces"
# item 17: CHECKBOX (0x05) enabled
# bounds: x1=100 y1=226 x2=170 y2=244
# text: "Comma"
# item 18: CHECKBOX (0x05) enabled
# bounds: x1=100 y1=244 x2=170 y2=262
# text: "<CR>"
# item 19: CHECKBOX (0x05) enabled
# bounds: x1=194 y1=244 x2=259 y2=262
# text: "<LF>"
# item 20: CHECKBOX (0x05) enabled
# bounds: x1=100 y1=262 x2=190 y2=280
# text: "Semicolon"
# item 21: CHECKBOX (0x05) enabled
# bounds: x1=194 y1=226 x2=259 y2=244
# text: "Other"
# item 22: CHECKBOX (0x05) enabled
# bounds: x1=194 y1=262 x2=259 y2=280
# text: "Other"
# item 23: TEXT (0x88) disabled
# bounds: x1=10 y1=208 x2=95 y2=226
# text: "End of Field"
# item 24: TEXT (0x88) disabled
# bounds: x1=10 y1=244 x2=95 y2=262
# text: "End of Line"
# item 25: EDIT_TEXT (0x10) enabled
# bounds: x1=256 y1=228 x2=321 y2=246
# text: ""
# item 26: EDIT_TEXT (0x10) enabled
# bounds: x1=256 y1=262 x2=321 y2=280
# text: ""
# item 27: TEXT (0x88) disabled
# bounds: x1=12 y1=352 x2=122 y2=370
# text: "Select Member:"
# item 28: EDIT_TEXT (0x10) enabled
# bounds: x1=127 y1=352 x2=252 y2=370
# text: ""
# item 29: CHECKBOX (0x05) enabled
# bounds: x1=104 y1=384 x2=242 y2=402
# text: "Open All Members"
# item 30: CHECKBOX (0x05) enabled
# bounds: x1=104 y1=404 x2=242 y2=422
# text: "Save All Members"
# item 31: CUSTOM (0x80) disabled
# bounds: x1=262 y1=133 x2=331 y2=151
# data: ""
# item 32: BUTTON (0x04) enabled
# bounds: x1=128 y1=304 x2=228 y2=324
# text: "Help"
# item 33: TEXT (0x88) disabled
# bounds: x1=16461 y1=219 x2=16574 y2=238
# text: "Query document"
# item 34: CUSTOM (0x80) disabled
# bounds: x1=16422 y1=212 x2=16454 y2=244
# data: ""
# item 35: CHECKBOX (0x05) enabled
# bounds: x1=10 y1=284 x2=184 y2=300
# text: "Strip Enclosing Quotes"
DITL_4001_OpenFile.txt
# 11 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=256 y1=138 x2=336 y2=156
# text: "Open"
# item 1: BUTTON (0x04) enabled
# bounds: x1=59 y1=1152 x2=77 y2=1232
# text: ""
# item 2: BUTTON (0x04) enabled
# bounds: x1=256 y1=163 x2=336 y2=181
# text: "Cancel"
# item 3: CUSTOM (0x80) disabled
# bounds: x1=232 y1=39 x2=347 y2=59
# data: ""
# item 4: BUTTON (0x04) enabled
# bounds: x1=256 y1=68 x2=336 y2=86
# text: "Eject"
# item 5: BUTTON (0x04) enabled
# bounds: x1=256 y1=93 x2=336 y2=111
# text: "Drive"
# item 6: CUSTOM (0x00) enabled
# bounds: x1=10 y1=39 x2=230 y2=185
# data: ""
# item 7: CUSTOM (0x00) enabled
# bounds: x1=229 y1=39 x2=246 y2=185
# data: ""
# item 8: CUSTOM (0x80) disabled
# bounds: x1=252 y1=124 x2=340 y2=125
# data: ""
# item 9: TEXT (0x88) disabled
# bounds: x1=20 y1=1044 x2=116 y2=1145
# text: ""
# item 10: CHECKBOX (0x05) enabled
# bounds: x1=10 y1=195 x2=150 y2=215
# text: "Select Columns"
DITL_4002_Text Export Options.txt
# 27 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=224 y1=153 x2=304 y2=173
# text: "OK"
# item 1: CUSTOM (0x80) disabled
# bounds: x1=228 y1=153 x2=297 y2=171
# data: ""
# item 2: BUTTON (0x04) enabled
# bounds: x1=126 y1=152 x2=206 y2=172
# text: "Cancel"
# item 3: TEXT (0x88) disabled
# bounds: x1=4 y1=4 x2=188 y2=28
# text: "Text File Export Options:"
# item 4: CUSTOM (0x80) disabled
# bounds: x1=16422 y1=212 x2=16454 y2=244
# data: ""
# item 5: TEXT (0x88) disabled
# bounds: x1=16461 y1=219 x2=16574 y2=238
# text: "Query document"
# item 6: CHECKBOX (0x05) enabled
# bounds: x1=100 y1=365 x2=238 y2=383
# text: "Save All Members"
# item 7: CHECKBOX (0x05) enabled
# bounds: x1=100 y1=345 x2=238 y2=363
# text: "Open All Members"
# item 8: EDIT_TEXT (0x10) enabled
# bounds: x1=125 y1=320 x2=250 y2=338
# text: ""
# item 9: TEXT (0x88) disabled
# bounds: x1=660 y1=0 x2=756 y2=101
# text: ""
# item 10: RADIO_BUTTON (0x06) enabled
# bounds: x1=4 y1=36 x2=87 y2=54
# text: "Data Only"
# item 11: RADIO_BUTTON (0x06) enabled
# bounds: x1=97 y1=36 x2=162 y2=54
# text: "Labels"
# item 12: RADIO_BUTTON (0x06) enabled
# bounds: x1=182 y1=36 x2=277 y2=54
# text: "Header"
# item 13: TEXT (0x88) disabled
# bounds: x1=10 y1=320 x2=120 y2=338
# text: "Select Member:"
# item 14: RADIO_BUTTON (0x06) enabled
# bounds: x1=94 y1=64 x2=139 y2=82
# text: "Tab"
# item 15: RADIO_BUTTON (0x06) enabled
# bounds: x1=188 y1=64 x2=246 y2=82
# text: "Space"
# item 16: BUTTON (0x04) enabled
# bounds: x1=699 y1=0 x2=717 y2=80
# text: "Hidden"
# item 17: RADIO_BUTTON (0x06) enabled
# bounds: x1=94 y1=82 x2=164 y2=100
# text: "Comma"
# item 18: RADIO_BUTTON (0x06) enabled
# bounds: x1=94 y1=104 x2=164 y2=122
# text: "<CR>"
# item 19: RADIO_BUTTON (0x06) enabled
# bounds: x1=188 y1=104 x2=244 y2=122
# text: "<LF>"
# item 20: RADIO_BUTTON (0x06) enabled
# bounds: x1=94 y1=122 x2=184 y2=140
# text: "Semicolon"
# item 21: RADIO_BUTTON (0x06) enabled
# bounds: x1=188 y1=82 x2=244 y2=100
# text: "Other"
# item 22: RADIO_BUTTON (0x06) enabled
# bounds: x1=188 y1=122 x2=245 y2=140
# text: "Other"
# item 23: TEXT (0x88) disabled
# bounds: x1=4 y1=64 x2=89 y2=82
# text: "End of Field"
# item 24: TEXT (0x88) disabled
# bounds: x1=4 y1=104 x2=89 y2=122
# text: "End of Line"
# item 25: EDIT_TEXT (0x10) enabled
# bounds: x1=250 y1=84 x2=306 y2=102
# text: ""
# item 26: EDIT_TEXT (0x10) enabled
# bounds: x1=250 y1=122 x2=306 y2=140
# text: ""
DITL_6095_Preferences.txt
# 29 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=287 y1=268 x2=347 y2=288
# text: "OK"
# item 1: BUTTON (0x04) enabled
# bounds: x1=286 y1=242 x2=346 y2=262
# text: "Cancel"
# item 2: CUSTOM (0x00) enabled
# bounds: x1=179 y1=43 x2=355 y2=62
# data: ""
# item 3: CUSTOM (0x00) enabled
# bounds: x1=179 y1=68 x2=272 y2=87
# data: ""
# item 4: PICTURE (0xC0) disabled
# bounds: x1=13 y1=8 x2=337 y2=36
# PICT resource ID: 130
# item 5: ICON (0x20) enabled
# bounds: x1=22 y1=80 x2=54 y2=112
# ICON resource ID: 400
# item 6: ICON (0x20) enabled
# bounds: x1=70 y1=80 x2=102 y2=112
# ICON resource ID: 17780
# item 7: TEXT (0x88) disabled
# bounds: x1=22 y1=52 x2=102 y2=71
# text: "Background"
# item 8: CUSTOM (0x80) disabled
# bounds: x1=0 y1=0 x2=0 y2=0
# data: ""
# item 9: RADIO_BUTTON (0x06) enabled
# bounds: x1=216 y1=103 x2=320 y2=127
# text: ""
# item 10: CUSTOM (0x80) disabled
# bounds: x1=232 y1=103 x2=320 y2=127
# data: ""
# item 11: RADIO_BUTTON (0x06) enabled
# bounds: x1=216 y1=127 x2=320 y2=151
# text: ""
# item 12: CUSTOM (0x80) disabled
# bounds: x1=232 y1=127 x2=320 y2=151
# data: ""
# item 13: RADIO_BUTTON (0x06) enabled
# bounds: x1=216 y1=151 x2=320 y2=175
# text: ""
# item 14: CUSTOM (0x80) disabled
# bounds: x1=232 y1=151 x2=320 y2=175
# data: ""
# item 15: CUSTOM (0x80) disabled
# bounds: x1=0 y1=0 x2=0 y2=0
# data: ""
# item 16: CHECKBOX (0x05) enabled
# bounds: x1=8 y1=123 x2=192 y2=141
# text: "Use temporary memory"
# item 17: CHECKBOX (0x05) enabled
# bounds: x1=8 y1=141 x2=192 y2=159
# text: "Show memory window"
# item 18: CHECKBOX (0x05) enabled
# bounds: x1=8 y1=159 x2=192 y2=177
# text: "Show status window"
# item 19: CHECKBOX (0x05) enabled
# bounds: x1=8 y1=177 x2=245 y2=195
# text: "Thin lines for Postscript printing"
# item 20: CHECKBOX (0x05) enabled
# bounds: x1=8 y1=195 x2=237 y2=213
# text: "Square boxes for reveal titles"
# item 21: CHECKBOX (0x05) enabled
# bounds: x1=8 y1=213 x2=177 y2=231
# text: "Extra large markers"
# item 22: CHECKBOX (0x05) enabled
# bounds: x1=8 y1=231 x2=272 y2=249
# text: "Prompt to journal windows on close"
# item 23: CHECKBOX (0x05) enabled
# bounds: x1=8 y1=249 x2=259 y2=267
# text: "Always journal windows on close"
# item 24: CHECKBOX (0x05) enabled
# bounds: x1=8 y1=267 x2=278 y2=285
# text: "Include popup controls in copy/print"
# item 25: CHECKBOX (0x05) enabled
# bounds: x1=8 y1=285 x2=278 y2=303
# text: "Suppress initial new table"
# item 26: TEXT (0x88) disabled
# bounds: x1=139 y1=46 x2=176 y2=66
# text: "Font:"
# item 27: CUSTOM (0x00) enabled
# bounds: x1=242 y1=182 x2=360 y2=202
# data: ""
# item 28: TEXT (0x88) disabled
# bounds: x1=139 y1=70 x2=176 y2=88
# text: "Size:"
DITL_6096_Preferences (WINVER).txt
# 31 entries
# item 0: BUTTON (0x04) enabled
# bounds: x1=283 y1=268 x2=356 y2=292
# text: "OK"
# item 1: BUTTON (0x04) enabled
# bounds: x1=283 y1=232 x2=356 y2=256
# text: "Cancel"
# item 2: CUSTOM (0x00) enabled
# bounds: x1=426 y1=178 x2=517 y2=200
# data: ""
# item 3: CUSTOM (0x00) enabled
# bounds: x1=426 y1=203 x2=519 y2=222
# data: ""
# item 4: PICTURE (0xC0) disabled
# bounds: x1=13 y1=4 x2=337 y2=32
# PICT resource ID: 130
# item 5: ICON (0x20) enabled
# bounds: x1=22 y1=76 x2=54 y2=108
# ICON resource ID: 310
# item 6: ICON (0x20) enabled
# bounds: x1=70 y1=76 x2=102 y2=108
# ICON resource ID: 309
# item 7: TEXT (0x88) disabled
# bounds: x1=22 y1=48 x2=102 y2=67
# text: "Background"
# item 8: CUSTOM (0x80) disabled
# bounds: x1=0 y1=-4 x2=0 y2=-4
# data: ""
# item 9: RADIO_BUTTON (0x06) enabled
# bounds: x1=391 y1=98 x2=495 y2=122
# text: "Text"
# item 10: CUSTOM (0x80) disabled
# bounds: x1=411 y1=98 x2=499 y2=122
# data: ""
# item 11: RADIO_BUTTON (0x06) enabled
# bounds: x1=391 y1=122 x2=495 y2=146
# text: "Headings"
# item 12: CUSTOM (0x80) disabled
# bounds: x1=411 y1=122 x2=499 y2=146
# data: ""
# item 13: RADIO_BUTTON (0x06) enabled
# bounds: x1=391 y1=146 x2=495 y2=170
# text: "Titles"
# item 14: CUSTOM (0x80) disabled
# bounds: x1=411 y1=146 x2=499 y2=170
# data: ""
# item 15: CUSTOM (0x80) disabled
# bounds: x1=0 y1=-4 x2=0 y2=-4
# data: ""
# item 16: TEXT (0x88) disabled
# bounds: x1=399 y1=70 x2=442 y2=90
# text: "xx"
# item 17: CHECKBOX (0x05) enabled
# bounds: x1=8 y1=137 x2=192 y2=155
# text: "Show tool bar"
# item 18: CHECKBOX (0x05) enabled
# bounds: x1=8 y1=155 x2=192 y2=173
# text: "Show status bar"
# item 19: CHECKBOX (0x05) enabled
# bounds: x1=8 y1=173 x2=245 y2=191
# text: "Thin lines for Postscript printing"
# item 20: CHECKBOX (0x05) enabled
# bounds: x1=8 y1=191 x2=237 y2=209
# text: "Square boxes for reveal titles"
# item 21: CHECKBOX (0x05) enabled
# bounds: x1=8 y1=209 x2=177 y2=227
# text: "Extra large markers"
# item 22: CHECKBOX (0x05) enabled
# bounds: x1=8 y1=227 x2=272 y2=245
# text: "Prompt to journal windows on close"
# item 23: CHECKBOX (0x05) enabled
# bounds: x1=8 y1=245 x2=259 y2=263
# text: "Always journal windows on close"
# item 24: CHECKBOX (0x05) enabled
# bounds: x1=8 y1=263 x2=278 y2=281
# text: "Include popup controls in copy/print"
# item 25: CHECKBOX (0x05) enabled
# bounds: x1=8 y1=281 x2=278 y2=299
# text: "Suppress initial new table"
# item 26: TEXT (0x88) disabled
# bounds: x1=386 y1=181 x2=423 y2=201
# text: "Font:"
# item 27: CUSTOM (0x00) enabled
# bounds: x1=239 y1=91 x2=357 y2=111
# data: ""
# item 28: TEXT (0x88) disabled
# bounds: x1=386 y1=205 x2=423 y2=223
# text: "Size:"
# item 29: BUTTON (0x04) enabled
# bounds: x1=283 y1=142 x2=356 y2=166
# text: "Fonts..."
# item 30: TEXT (0x88) disabled
# bounds: x1=159 y1=48 x2=355 y2=83
# text: "Select from Analyze Menu to set platform preferences:"